RC India

Hello Guys
I have imported a Clone Baja 5b SS buggy for my friend from China and i am impressed from their quality at such a lower price in addition to that the buggy have a real 26 cc Fulie engine
and here are a few descriptions of the buggy

Baja 5B SS

1.Brand New
2.Best Price
3.Best Delivery
Model:Baja 5B

Features

HPI Baja 5B SS Kit w/Clear Body 10610

Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gun-metal gray in color, constructed of aircraft grade 6061 T6 aluminum, side guards protect engine from dirt and debris

Drive: Rear wheel gear drive with heavy duty dogbones

Engine: 2 cycle 1.6 cu in (26cc) gasoline with pull starter, quick release foam air filter, primer, choke and kill switch

Servo: Water proof, metal gear high torque 25kg-cm steering servo speed, 0.16 sec at 60°

Ball Bearings: Full set included

Shocks: Four VVC heavy duty aluminum shocks with 5 externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces, modified rear shock tower brace

Main Gear: 57 tooth composite construction

Gearbox: Sealed, heavy duty metal gears

Differential: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears, aluminum alloy diff case

Brakes: Ventilated dual disc

Clutch: 2-shoe, 8000 RPM

Gas Tank: 25.3 oz (750cc)

Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide 6.7" (170mm) outer diameter

Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm) wide, 6.7" (170mm) outer diameter

Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue

Body: Clear pre-cut

Rear Wing: Molded black plastic with decals applied

Roll Cage: Baja style high impact nylon protects engine and body from crash damage

Suspension: Fully adjustable, long travel double wishbone

Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chass

Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

Warranty: 2-year limited, valid only in USA, Canada and South America

Specifications

Vehicle-

Length: 32.2" (817mm)

Front Width: 18.1" (460mm)

Rear Width: 18.9" (480mm)

Height: 10" (255mm) with 1G, 11" (280mm) with 0G

Ride Height: 3" (76mm)

Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)

Weight: 21.3 lbs (9.6kg) without fuel

Wheelbase: 22.4" (570mm) wheels on-center front-to-rear _

Front Track: 15.5" (395mm)

Rear Track: 15.7" (400mm) outer edges of wheels

Gear Ratio: 8.382:1

Tires-


Rear: 3.1" (80mm) x 6.7" (170mm)

Body-

Length: 22.9" (581mm)

Width: 8.8" (224mm) at rear wheels (widest point) 3.25" (82mm) ahead of front wheels (thinnest point)

Height: 4.75" (121mm) at highest point

Package Contents

HPI Baja 5B SS kit, engine, steering servo, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease body, with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual, 3.4oz (100cc) Z191 2-cycle oil

Requirement


Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil at 25:1 ratio,
Transmitter Batteries: 8 AA

Paint: Spray or brush-on for polycarbonate bodies

Building and track equipment



the price of one buggy is 28,999 Rs + shipment to any part of the country
and if you guys want more information about the buggy then feel free to contact me at my email address



waiting for your inquiries
Abdul Samad

pm'd you ..


regards,
Asif

By what i can see from the pictures this is a definate SCAM.

PLEASE BEWARE!!!

The outer box shown in the picture is the actual HPI Baja 5b SS Kit Box
The car is packed in form of rtr. And is actually how HPI packs their rtr models. Even the white small carton hanging is the same way how hpi packs their adapters.

The profile information shows the person sitting in karachi.

I myself have imported a baja clones from china. They do come cheap. But none of the manufacturers in china will ever brand it as HPI or ever print their boxes.

So my recommendation would be to deal with utter caution.

Is it still thre?