Its very important to do the compass calibration before the first flight.

Specification
Aircraft Weight: 980 grams
Take off weight: <= 1280 grams
Battery: 2700mah 11.1V 20C LiPo
Charging time: About 2 hours
Remote: 2.4Ghz DSSS
Operational Distance: 500m
Battery: 4 x AA (does not comes with the kit)
Product size: 300mm (motor to motor)

Kit comes with:
1 x Drone
1 x 2.4Ghz Remote Control (2 switch and 2 aux pot)
2 pairs x 8045 Props (very well balanced)
1 x Anti Vibration Plate
1 x GoPro frame
1 x Manual and CD (instruction video)
1 x Charger
1 x 2700mah 11.1V lipo
Hardware tools screw driver, spaner







Price:
22,500/-

Buy Now

 superb satya bhai 

does it support external gimbals also 

Yes it does, you can add gimbal and if you are good with soldering then a telemetry also.

Great work satyabhai. 

Thanks Manoj

i have started soldering the day i born 

jokes apart but really its a good initiative and it is as they advertise for  DJI phantom "FOR EVERYONE" 

Thats good

This indeed is very good quad for beginners. once you get your hand stuck on this then you can change the remote to your own to get a good range. And with APM2.52 you have so many possibilities.

I also want to announce this in this forum that i have purchased rc good from almost all the online RC stores from india and abroad

and faced late shipping, higher shipping charges, parts going out of stock after payment and worst is do not ask about return type attitude.

but this man @satyagupta here is standing tall for all the hobbyists and all the community,

e.g.. i've got one faulty simonk esc (only beeping one) and when i told him that in a conversation here in this forum

he himself suggested me that he will give a replacement for the esc and that to without asking for the older one,

soon after i order some parts from www.quadkopter.com i've got the parcel on time as usual and to my surprise the replacement esc was there in the package without any other charges not even the shipping charges,

can anyone imagine that............  

: to satya and www.quadkopter.com   

Thanks Bhanu

But trying to do the best of what i can do.

what all is required so that this quad can have waypoints.
Just asking.

Connect CX20 using USB to computer and open mission planner.

Add way points and change the mode out of the 5 modes to mission.

Though all this is DIY as the controller is APM, all that i am saying is everything that APM can do is possible with CX20 too..

Great work satyaji
some more information about the quad
1)inside look :-
https://github.com/jlnaudin/x-VTOLdrone/wiki/Inside-the-Cheerson-CX-20-Auto-pathfinder-(or-called-the-Quanum-Nova)

2)guide to connect telemetry :-
https://github.com/jlnaudin/x-VTOLdrone/wiki/TUTO:-Connecting-the-telemetry-to-the-Cheerson-CX-20-(aka-the-Quanum-NOVA)

3)maiden flight :-
https://github.com/jlnaudin/x-VTOLdrone/wiki/CX-20-Auto-pathfinder-(Cheerson)-tested-with-the-APM---ArduCopter-v3.1.2---maiden-flight

4)Full autonomous mission:-
https://github.com/jlnaudin/x-VTOLdrone/wiki/TEST-FLIGHT:-Full-autonomous-mission-with-the-Cheerson-CX-20-Auto-pathfinder-(Quanum-NOVA)

Regards
Chintal
Rcmumbai.com

Quote from: satyagupta on August 13, 2014, 08:06:34 AM
Connect CX20 using USB to computer and open mission planner.

Add way points and change the mode out of the 5 modes to mission.

Though all this is DIY as the controller is APM, all that i am saying is everything that APM can do is possible with CX20 too..

Sir, what else is required to make this quad fully autonomous.

Thats all nitesh, the quad comes with APM and GPS those are main requirements. But APM is not configured to do mission, you have to add the waypoints and configure apm which is very easy (google it)

Does it include the compass module and telemetry receiver and tx.
Thanks Sir, I know that we need to plan and do all the configs.
I am googling about apm and multirotor stuff from a past week  .

I comes with drone with transmitter. Drone has motor esc and controller

controller is APM2.52 with external compass and GPS.

Transmitter is 7 channel 2.4Ghz

telemetry it does not comes with but you can fix on easily. All you need is a telemetry kit and some soldering skills

thanks you answered all my questions just one doubt.
What is the use of hk 433mhz telemtry kit what all does it do and is it necessary to have this thing for waypoints and return to home stuff.

Telemetry radio is used to send telemetry data from controller back to ground station. Using APM you can use a telemetry radio along with mission planner to modify settings or every change waypoints using a laptop or tablet.

Just google or check youtube about the same.

i want cx 20 prop set.........

Satya Sir, something off the course. Please remove the word 1X Drone and replace it with Quad. this Drone word is Killing us.

please bring in fresh stock

Sir how can I contact u ?
Here is my number 7350489938
I'll need some two pieces ..

Where can I get the CX 20 from India ?

I think RC Mumbai can help
http://rcmumbai.com/index.php/product/cx-20-rtf-quadcopter/

I want to Purchase Cheerson CX 20 Open source. Can you provide me this?