Making a quad is never easy, if you plan to make every other part by yourself. I am talking about frame, arms, mounts etc.

It would be easy for quad or hex but then tricopter would had been a bit difficult, with that tilt mechanism.

Hence we have brought series of products to make your (quad)copter building easy: EasyCopter

EasyCopter Hub

Make Tri,Quad,Hex or even octa with this little hub.
Price: INR 350/-
Buy Now

EasyCopter H-Quad Hub

Make H-Quad with this little hub.
Price: INR 400/-
Buy Now

EasyCopter Straight Motor Mount

Motor mount with landing gear, made with 1.5mm and 2mm glass fiber sheets, very rigid and sturdy.
Price: INR 350/-
Buy Now

EasyCopter Tilt Motor Mount

Tilt Motor mount with landing gear for tricopters, made with 1.5mm and 2.5mm glass fiber sheets, very rigid and sturdy.
Price: INR 550/-
Buy Now

EasyCopter Tri Copter Body

Tricopter body (By David Windestål)
Price: INR 375/-
Buy Now

We also have 13mm booms
Wooden @ INR 240/- (4 pcs)


Aluminum @ INR 165/- (2 pcs)


Note: EasyCopter series are inspired by Flite Test's Rotor Bone series, we have added our modification to it and selling it here.

Great work...

Happy to see Indian frames in market
Great work satya ji

Thanks Chintal

MADE IN INDIA.
Good job satya ji.

Sir what's the motor requirement and the propeller size requirement for the easycopter h quad

Easy copter series is a very cool concept and the fact that it can accomodate a large variety of electronics and different combinnation of arm lengths and electronics combos make it the most versatile setup I have ever seen.

As for the H Quad- go for the sunnysky 2212 980 kv motors. You should get motors in the 750-980 kv range + 30 Amp SimonK ESCs with 10x4.5 props on a 3 cell setup.

If you have a good budget: get Tiger Motors: http://www.quadkopters.com/product/t-motors-mt-2212-980kv/

I have already bought
4x avionic c2830 850 kv motors
1x hobbywing  4 20 amp Quattro esc
1x 2200 mah 11.1 volt lipo
1x easycopter h quad hub
4x wood boom sticks

WILL THIS SETUP WORK ? I ALSO HAVE BOTH 8x4.5 and 10.45 PROPELLERS WHICH ONE SHOULD I USE ?

The controller will be dji naza lite

It will work. Use the 10x4.5 props. What arm length have you decided upon?

I have not decided it , the quadkopters website , told me to buy the 10 inch wood or aluminium sticks , I bought wood sticks , but if  the 10 inch propeller will come about 5 inch max on a half side , then my go pro will be shattered

Reply pls

You will need to cut the 10 inch arms into halves and then attach them to the 90deg joiners, or purchase some longer booms.
In the pic the black lines depict where the booms should end.

But I can simply use the 8 inch prop na ?

8x4.5 is too small for a 3s setup. If you want to carry weight and have good efficiency then use 10x4.5