Sorry that I couldn't keep a track of bookings in my last thread, so I bring the offers to you again
10 servo pin leads (the 3 pin thing) f2
2 dean's pairs f1
5 dean's female and 3 xt60 female f1
1m silicon wire. Black 12 awg f1
1m silicon wire red 12 awg f1
14 bc pairs rs.200
Foldable gps stand rs.400
Cross mounts with m3 screws for motors f1
Many wires (not rubberised silicon) including normal silicon wires f2
2x y connectors f1
1m-f servo connector f1
1 lipo voltage alarm rs. 150
Cf tarot battery mount and Tarot sticking pad f2
1 simulator 12 in one rs. 500
1 orange rx with dx5e used(antenna replaced by dx6i for better range) rs. 2500
1 motor sunny sky x2212 esc30 a simonk battery zippy 1300 3s new and rhino 1550 3s and 10inch prop with xt60 pair for planes rs 2300
8x simonk escs 600/ peice
8x 900 kv ax2810q motors 1500/ peice
Power distribution board rs. 200
1 1000mah 2s battery rs. 400
1 battery strap f2
M3 screws (as many required) f1
Tri copter frame with yaw mech rs. 500
Reptile quad frame wooden rs.400
4x aluminium hardware rs. 200
650 aluminium hobby wing frame for quad rs.2000
Hot glue gun with 20 sticks rs. 500
Hot air gun with 100m shrink rs.600
Hex drivers bhondus x2 rs.500/ kit
Line following bot kit rs. 500
Magnetic leveler for multi copters rs.100
Digital weighing scale upto 50kg rs.400
Pcb variable soldering unitrs.500
F1 are freebies for any order, f2 will be for orders above 1k
Anyone can claim 1 freebie of their choice per order
For ex an order of 3k will have 3 f2
Please book the simulator Kit for me.
@ribz,
Refer previous sale thread.
Still need hot air gun.
Could take line following bot kit too (for Dad!)
Please pm.
Regards
book 1000mah 2s and lipo low volt alaram,
share ur acount details and check ur inbox
kk iyer sir, booked for you :)
sim kit booked for sooraj, bot kit and air gun for kk sir, 1000 mah and voltage alarm for GD,
please list freebies you want along
Thanks Ribz, I would like to have the Servo Y connectors as my Freebie.
Please PM your Acc. details, I will Transfer money on Monday.
pl add dean pairs as freebi for me
please book these things mate
Magnetic leveler for multi copters rs.100
Digital weighing scale upto 50kg rs.400
Quote from: Ribz on February 07, 2015, 06:47:49 PM
kk iyer sir, booked for you :)
@ribz,
Pl add lipo alarm to bot and hot air gun.
And freebie 10 servo pin leads (whatever that may be!)
Or whatever you think fit.
Pm Amount incl postage.
SBI Debit Card number for instant trfr via ATM, else a/c details.
Thanks.
http://www.quadkopters.com/product/connectors/male-to-male-servo-lead-jr-10cm-10pcs/ (http://www.quadkopters.com/product/connectors/male-to-male-servo-lead-jr-10cm-10pcs/)
these are servo leads kk sir
already promised lipo vol. alarm to GD, would you like anything else instead?
leveler and digi weighing scale booked for dharmik
kindly pm me your whatsapp nos. , i wont mind sending pics before the deal, will pass on the acc. details then
i would like a digital weighing scale, since it is booked could you get an other?? but count me in if not sold!!
JK
Quote from: Ribz on February 07, 2015, 11:39:30 PM
http://www.quadkopters.com/product/connectors/male-to-male-servo-lead-jr-10cm-10pcs/ (http://www.quadkopters.com/product/connectors/male-to-male-servo-lead-jr-10cm-10pcs/)
these are servo leads kk sir
already promised lipo vol. alarm to GD, would you like anything else instead?
@ribz,
Doesn't matter.
Need those leads (for stabilization unit as well as wireless buddy box module), irrespective of whether charged or free.
And i think i have one D2826 which lacks mounting plate and screws. Could use that.
Thanks
pictures for the tricopter and tilt mechanism pls..........
Quote from: K K Iyer on February 07, 2015, 11:29:16 PM
And freebie 10 servo pin leads (whatever that may be!)
Iyer sir, that Male to male servo leads will be useful, as you are making a Multirotor (Quadkopters Kit) :thumbsup:
Hi Ribz,
I am sending you pm. please check.
Pics will be sent to everyone by Monday evening to their respective nos. Or mail,
And will update stock following payment details
Ribz Please send your address
@ribz,
Await a/c details and amount
@ram Singh check whatsapp..
@kk sir will be sent after photos, things booked for you are refused for all other requesties
Monday evening
Everyone is requested to send me their shipping address, also drop their whatsapp nos, so that we can do early with trade, and update remaining stocks for the others
Hello Ribz sir, Address send via PM - please note that I prefer Speedpost.
@ribz,
Hope you saw my pm of 3.41pm today
@ribz,
Await tracking number...
will update the sold out items, second shipment attempt delayed, offices were closed on weekend
first 2 shipped, post review when you recieve them,
GD apologies as i've been lingering it all the way, i tried in 3 offices today, it was a weekend off,
i've added a new tarot 20cm battery plate as freebie for you worth 600
KK sir, you order is also well packed and will be shipped tom
likewise for sooraj palakad
foll. left-
*5 dean's female and 3 xt60 female f1
*Foldable gps stand rs.400
*Cross mounts with m3 screws for motors f1
*Tarot sticking pad f2
1 simulator 12 in one rs. 400(on hold)
*1 orange rx with dx5e used(antenna replaced by dx6i for better range) rs. 2300
*1 motor sunny sky x2212 simonk esc 30a, djiprop/plane combo 1300
*M3 screws (as many required)
*Tri copter frame with diy yaw mech rs. 400
*shrinks 6mm
*Reptile quad frame wooden rs.400
*4x aluminium hardware rs. 200
*Hex drivers bhondus x2 rs.500/ kit
*Magnetic leveler for multi copters rs.100
I am interested in the motors. please let me know if you can reduce a little.
pm sent Regards
*1 orange rx with dx5e used(antenna replaced by dx6i for better range) rs. 2300
4x aluminium hardware.
Pics ?
All shipping done, tracking nos. Sent
Parichay will send you whatsapp pics
@romanxdesousa on hold for you till tomorrow, haven't received confirmation yet, will be passed on to other members otherwise
On hold for roman, seconded by fxshoppe
Chek pm. Interested in gps stand and tricopter frame.
Please check PM. I asked to be put next in queue for the simulator
SK, I bought the Simulator, friend .
Oh ok. In the last post it was mentioned that it is 'on hold', If you bought it then no problem :thumbsup:
sk, sim sold to sooraj, only to realise that i needed one, also i needed the batteries for fpv that i sold to GD, so i ended up buying everything for LHS at twice the price
everyone got freebies
:D never mind
still havent got the pics :(
Tricopter frame pics?
Ribz
Please avoid, Greatest, Grandest, Bestest and such superlatives
PS
if some sale qualifies Grandest etc in some time that i have seen is Sundaram and Param's sale, in terms of value and nos too prolly
Quote from: rcpilotacro on February 17, 2015, 10:53:41 PM
Please avoid, Greatest, Grandest, Bestest and such superlatives
Bestest ??? Is there is such a superlative :headscratch:
Edit : Yes there is such a word :rofl:
bestest
ˈbɛstɪst/
adjective
informal
adjective: bestest
(in children's use) the very best.
"you're the bestest friend I've ever had"
Pm sent
:salute: Rcpilotacro sir will keep that in mind
Robin, pics...
Yes robin got your pm, i will love to move on and back out , i think you should honor your 1800/- price you posted here http://www.rcindia.org/for-sale/dx5e-yet-another-thread/ (http://www.rcindia.org/for-sale/dx5e-yet-another-thread/) , this tx is in a bad condition no trims for elevator and alerions ,antena is stuck at the side with wraping tape, no batteries, no charger .how will a bigginer trim a plane up in the air,please post pictures of the tx here if possible so eveyone can see it and not waste there time if you want i can put up the picture you mailed me. According to me 1000rs is ok for this tx if not i suggest all its better buying a new piece dx5e for 6k and not worring about a hanging antenna and triming it will help in the long run aswell...... just a sugggestion.
" grandest sale ever" 8-)
Ribz, do you by any chance have any relation with the handle robin alias robin john in rcindia?
I am robin john ashok :) i
Roman dsousa, reconsidering it, apologies for that
I thought my investment on radio (the rx, switches and firmwares were precious, but they don't matter much surely,
I revised the price before getting orders for radio, unfortunately I lately realised that I'll have to buy a new one if I sell this one
Sure setting it at 1800 again only for Roman dsousa if he wishes to take it, not for sale otherwise