Hobbico trainer .40 size for parts

Started by flatspin_king, March 17, 2010, 02:40:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

flatspin_king

Hi guys,
I have a complete fuse, along with tailplane and the right wing. Everything is in great condition - just a little dusty from storage. The left wing was damaged during a move. The horizontal stab is glued in but the vertical stab is loose. I recovered it (maybe recut it from a piece of solid balsa sheet -dont remember now), so it does not have the trim scheme. Also the rudder and elevator (included) are unattached and the rudder would need to some white covering. The original strip elevator is cracked under the covering but can be easily repaired with some ca. I also have a slightly shorter spare elevator from another plane that may be used. 
I had intended to build a new wing panel and had cut out the ribs etc. -which I can include.  But I lost interest as I dont fly trainers anymore.
This would be a great purchase for anyone looking for a spare fuse or wing; or for someone willing to buy or build a left wing panel. It essentially needs a wing panel and odds and ends like wheels, some hardware like wheel collars, plastic straps for retaining the landing gear  etc. to be airworthy.   
The plane retails for nearly Rs. 5000 (109 usd) at tower hobbies.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXK971&P=0   
I am asking Rs. 2800 or best offer. Local pick up in Delhi would be preferred.

Contact me at 26741541 or email.   

thanks for looking!