Main Menu

Imax B6 Balance Charger

Started by friendz675, September 29, 2013, 09:02:51 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

friendz675

I wanted to sell my IMAX B6 Balance Charger which is almost the new one.

I would like to sell it for 1500 with shipping.

If interested please contact me.

friendz675

Im selling this charger because When I'm charging 2200mah 3S battery its charging and its working fine. But when I'm charging 4200mah 3S battery the 12V dc adaptor gets heated up like anything. I think this charger is not meant to charge batteries that are rated high amps

friendz675

Specifications:

Operating voltage range: DC 11-18 Volts
Circuit power: Max. charge power 50W
Max. discharge power 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300mA/cell
NiCd/NiMH battery cell count: 1-15cells
Li-ion/Fe/Polymer cell count: 1-6cells
Pb battery voltage: 2-20V
Net weight: 277g
Dimension: 133x87x33mm

arun.sreelakam

I am using a 12v 5A charger works perfectly for 2200, 3300, 5000 and even 10000mah lipos
Use good adapters with high amp rating
http://www.quadkopters.com/product/power-supply-12v5a/
this suits well
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

friendz675

Is it so. Does this fix my problem?

friendz675

I think arun.sreelakam is right. I checked with the adaptor I'm using is only 12V 1.5A. I think that is the root cause of my problem.

I should try it with the adaptor in the link
http://www.quadkopters.com/product/power-supply-12v5a/

Thank you arun.sreelakam you saved my charger.

avesh

please specify whether it is a clone or genuine.
Planes are like feel-good buddy movies and helis are like horror films... you just have to like being scared!

friendz675


friendz675

FYI

How to identify if its clone or genuine

romanxdsouza

can i use my  laptop  charger with this charger out put  +19.0v(19.0v)---4.74A (4.740,AC,,,,,,,input 100-240V-- 1.6A(1.6A)

vikkiakc

Quote from: romanxdsouza on October 04, 2013, 10:02:47 PM
can i use my  laptop  charger with this charger out put  +19.0v(19.0v)---4.74A (4.740,AC,,,,,,,input 100-240V-- 1.6A(1.6A)

Operating voltage range: DC 11-18 Volts

Charge current range: 0.1-5.0A

19Volts means it exceeds the voltage range specified.
And it can vary from 0.1-5.0A

A stands for Amperes.

It is strictly advisable to use charger having max amperage 5 or more the 5.

arun.sreelakam

You can use a laptop charger but The amp rating is below 3.5A For most of them..
Use a charger 12v is enough with 5A Rating Will best suits you for all kind of charging..
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

Aniket1995

"Flying is learning how to throw yourself at the ground and miss"
                                                                      -Douglas Adams

friendz675

I have tried the fix suggested and its working like a charm. {:)}

So I have decided to keep it for myself.


romanxdsouza

i knew you would  ;D ;Dthat why brought a new one from rc bharat. hunting for charger now, thanks all for suggestion on chargers