The ImmersionRC Vortex 180 mini is a ready-made racing drone. You only need to connect a receiver to the flight controller and you can go straight into the air. Because of its small size, the drone is very agile and therefore very fast on a track with lots of turns. The drone weighs only 202 grams excluding battery. The ImmersionRC Vortex 180 mini is a drone that is ideal for the novice FPV pilot. Nothing needs to be soldered to the drone. Simply connect the receiver and you’re ready to fly. The 4 inch model is very fast and manoeuvrable and can easily handle the larger models on the course.

ImmersionRC Vortex 180 Mini Specifications and Features
1. The integrated synergy flight controller. The Synergy flight controller combines the Fusion2 Twin F3 processors and the Tramp HV design. It is also integrated with 3 axis Gyro, 3 axis Accelerometer, and barometer, is pre-programmed with CleanFlight, and is future-proof, supporting future updates via a USB port on the back of the quad for programming and updates.

2. A set of 8 24-bit RGB LEDs sit on the tail of the Vortex, sandwiched safely between the upper, and lower frame plates. These LEDs are controlled by a dedicated 32-bit ARM processor.

3. It has a RotorSENSE feature because of which you never have to worry about soldering the motor wires on backwards. With this feature, if one motor is spinning in the wrong direction, you just spin the motor by hand in the direction you want it to go and the ESC will then spin the motors in that direction.

4. In the Vortex 180 Mini The On-screen-displays (OSD) and video transmitter have been integrated into the Synergy flight controller to simplify the design and reduce weight.

ImmersionRC Vortex 180 Mini Camera Quality & Specifications:
The flexible Vortex camera mount supports both a flight cam and an HD camera such as a GoPro or Mobius. The flight cam is protected from impacts and is suspended from a vibration-dampened carbon-fiber plate. An adjustable bracket allows the camera to be tilted to ensure a good forward view during high-speed racing. A 3A switching regulator allows any HD camera to be powered from the flight pack, allowing unnecessary camera batteries to be left at home.

ImmersionRC Vortex 180 Mini Battery Life:
For flying with the ImmersionRC Vortex 180 Mini, it is best to use a 4S battery with a capacity of 500 to 750mAh. Batteries with a higher capacity are too heavy for the drone. The ImmersionRC Vortex 180 Mini is equipped with an XT-30 connector.It has the same big change being that the battery lead is not a XT60 connector but the XT30. Keeping this in mind, while buying the Vortex 180, you will need to do the following: Change the lead on the Vortex 180 to a XT60, Change your batteries to XT30 connector, Buy new batteries with XT30 connector like the Tattu 850mAh 14.8V 75C 4S1P XT30 or the Dinogy 800mAh 14.8V 65C 4S LiPo XT30 Lipo
Product link
https://www.getfpv.com/vortex-180-mini-international-version.html

The quad is in factory sealed shrink wrap  and brand new.
Expecting 20k shipped for the same.open to offers.
WhatsApp at 9969740436

Thanks
For watching

Price drop 19500 shipped!!

Price drop 19250 shipped!!

19k shipped!!

18750 shipped!!!

18500 shipped!!!

18250 shipped!!

18000 shipped!!!

17750 shipped!!

17500 shipped!!

17250 shipped!!!

17000 shipped!!!

16750 shipped!!

16500 shipped!!

16250 shipped!!!

16k shipped!!

15750 shipped!!

Bump

15500 shipped!!!

15250 shipped!!

15k shipped!!

Sold thank you..