Hello everyone, I am letting go of some of the extra stuff I have as I won't be flying for a while.

1. ZMRX Quadcopter (ready to fly) w/
- DYS BE1806 2300Kv Black Edition Motors
- Sunrise Slim 20A ESC's w/ Blheli + Active Braking + Oneshot Programmed
- Flip32+ 10DOF Flight Controller
- ZMR250 CF Frame Cut Down
- WS2812 Programmable LED RGB Strip
- 3D Printed LED and Receiver Antenna Mount
- Buzzer

- The top plate is slightly cracked, if you run the battery strap through the bottom and middle plate, then it doesn't matter.
- The flight controller has been thoroughly used in many builds but works perfectly.
- The PCB I made to mount the XT60 is slightly cracked (I overtorqued the screws while mounting). It can be left as is, replaced, or a wire can be use for the XT60.
- No other damages.

- The build log can be found here - http://www.rcindia.org/multirotors/gc-zmrx-(cut-down-zmr250)/

Rs. 6000 (without receiver)

2. Flip32+ 10DOF Flight Controller w/ Case - Brand New - Rs. 1500

3. Tattu 4S 1800mAh 45C Battery - Perfect Condition - Kept on Storage - 5-10 Cycles - Rs. 1300

Refer to the second post for images.

ZMRX







Flip32+ 10DOF



Tattu 4S 1800mAh 45C

Bump.

Bump.

Tattu 4S booked for Horizon Aerials.