MATEKSYS FLIGHT CONTROLLER H743-WING

Started by RUNRC, April 12, 2022, 02:45:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RUNRC

MATEKSYS FLIGHT CONTROLLER H743-WING

https://runrc.in/product/mateksys-flight-controller-h743-wing/

FC Firmware:
ArduPilot(ChiBiOS): MATEKH743
INAV: MATEKH743 (To be supported soon)
BetaFlight: MATEKH743
PDB

Input voltage range: 9~36V (3~8S LiPo) w/TVS protection
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)
Current Senor: 132A,  3.3V ADC  (Scale 250 in INAV,  40 A/V in ArduPilot)
Sense resistor: 60A continuous, 132A burst.
BEC 5V output

Designed for the Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal, etc.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
BEC Vx output

Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 8 Amps, Max.10A
BEC 3.3V output

Linear Regulator
Continuous current: 200mA
Physical

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 54 x 36 x 13 mm
Weight: 30g with USB extender
Including

1x H743-WING
1x USB(Type-C)/Beep (Passive buzzer) Extender
1x 20cm SH-4P to GH-4P cable for CAN port
1x 20cm SH-6P to SH-6P cable for USB extender.
Dupont 2.54 pins  (Board is shipped unsoldered)

PRICE:7950/-
CONTACT:8010224500