Pristine Align Trex 600 Nitro Pro RTF with tons of upgrades and extras

lavneetgyani · April 04, 2011, 03:29:00 PM

Please see the actual heli here for current condition and quality followed by a video of autorotation:

http://www.facebook.com/album.php?aid=263607&id=544033338&l=b3ced1b00b

NEVER CRASHED OR BUMPED AND LIKE NEW

Align Trex 600 Carbon Nitro pro with following upgrades and other equipment:

OS 50SXH engine with muffler
All around Hitec HS-5485HB Digital Karbonite Gear Servos X 4
Futaba Gy520 Gyro with Futaba 9254 rudder servo
Align BT6 voltage regulator/switch/voltage meter with 7.4V 1900mah Align lipo Rx/glow battery (no need for external glow booster)
Upgraded metal rotor grips
Upgraded airbrushed canopy from Fusuno
Carbon main and tail blades 600mm

Following extras apart from RTF chopper above:

Extra Fibreglass original painted Trex Nitro pro canopy
Extra Align 600mm carbon blades
2 extra tail booms
Extra torque tube and bearing set
Extra header tank
Extra main gear
Extra main shaft
Extra front tail gear
2 extra tail rotor hubs
2 extra feathering shafts
Extra nylon blade grips with bearings
Extra landing skids and landing gear

Extra support equipment included:

12V cone starter
Starting shaft with one way bearing
4lit fuel tank with pump and tubing

60,000 with everything listed. An earnest request that only serious buyers reply or call me at 9811577845. Everything that I include along with professional building will make these cost well over 75K.
thanks
Lavneet

anwar · April 04, 2011, 04:39:22 PM

Gave up on nitro so easily ?

lavneetgyani · April 04, 2011, 05:49:39 PM

Thinking of going into large gassers

rcpilotacro · April 04, 2011, 06:00:51 PM

don't give up this beauty lavneet, gorgeous

lavneetgyani · April 04, 2011, 07:42:04 PM

I know, thanks for the compliment. I really look after my machines and build them with a lot of TLC. But sadly it is a choice I made, cant have gassers, nitros and electrics in the fleet. Too much equipment.

rcpilotacro · April 04, 2011, 07:50:43 PM

i agree, same dilemma here, good decision but nitro for me anyday, may be i love the smell of it..

anwar · April 04, 2011, 09:36:49 PM

Quote from: lavneetgyani on April 04, 2011, 05:49:39 PM
Thinking of going into large gassers

What's up with this gasser heli craze of late ?

What are you considering to get instead of this one ?

flyingboxcar · April 04, 2011, 09:41:27 PM

Lavneet sir,
When I see the word pristine, it shakes me up a bit.
A free bump to the top for a good deal

lavneetgyani · April 05, 2011, 04:21:36 AM

Quote from: anwar on April 04, 2011, 09:36:49 PM
What's up with this gasser heli craze of late ? What are you considering to get instead of this one ?

Thinking a vario kit of the Bell 47....just the kit and engine will cost me atleast twice what i sell eveything above for!!

Harveer · April 07, 2011, 02:43:20 AM

This is the reason, u can say......

lavneetgyani · April 07, 2011, 10:50:15 AM

Eggjactly the reason!!

tango · April 07, 2011, 11:16:45 AM

Have seen this heli fly. Its in excellent condition. Very well built, set up, clean and extremely well maintained. Would have surely picked it up if i was into nitro heli's...

lynxheli · April 23, 2011, 01:49:24 AM

I'd love to get this baby but ..................

lynxheli · April 23, 2011, 01:52:16 AM

lavneet phaji IF i am in delhi and I get to see this I am sure i will slip for this heli as right now i find myself giving excuses like its expensive graduate your skills first what do you need the spares for and what not but hearts of hearts i love your machine wish it was FREE- i know nothing is but whats the harm in wishing)

lavneetgyani · July 20, 2011, 05:54:14 AM

BUMP!! 55,000 for everything listed incl all spares and extras!!!

xantos · July 20, 2011, 09:31:06 PM

Lavneetji please put up the Nagpur night flying video also

jatin-128 · October 20, 2011, 12:13:23 PM

Sir, I want to buy it please give me more details......

Jatin.

lavneetgyani · October 20, 2011, 12:19:31 PM

Here are all the details:

NEVER CRASHED OR BUMPED AND LIKE NEW

Align Trex 600 Carbon Nitro pro with following upgrades and other equipment:

OS 50SXH engine with muffler
All around Hitec HS-5485HB Digital Karbonite Gear Servos X 4
Futaba Gy520 Gyro with Futaba 9254 rudder servo
Align BT6 voltage regulator/switch/voltage meter with 7.4V 1900mah Align lipo Rx/glow battery (no need for external glow booster)
Upgraded metal rotor grips
Upgraded airbrushed canopy from Fusuno
Carbon main and tail blades 600mm

Following extras apart from RTF chopper above:

Extra Fibreglass original painted Trex Nitro pro canopy
Extra Align 600mm carbon blades
2 extra tail booms
Extra torque tube and bearing set
Extra header tank
Extra main gear
Extra main shaft
Extra front tail gear
2 extra tail rotor hubs
2 extra feathering shafts
Extra nylon blade grips with bearings
Extra landing skids and landing gear

Extra support equipment included:

12V cone starter
Starting shaft with one way bearing
4lit fuel tank with pump and tubing

jatin-128 · January 06, 2012, 05:19:48 PM

Sir still have heli......

lavneetgyani · January 06, 2012, 06:05:43 PM

as I told you earlier, Call when you have the money ready.
Thanks

arjun_aero · October 20, 2013, 11:41:28 PM

is the heli still up for sale?....