Text only | Text with Images

RC India

RC Baazar => For Sale => Topic started by: umayash1 on February 02, 2014, 10:18:24 PM

Title: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: umayash1 on February 02, 2014, 10:18:24 PM
Here is what I use to cover my DIY NIMH packs, Lipo Packs, ESC's and lot more..
Don't know whether this is available in your cities or not.. But found worth sharing it..  

Shrinking rate: cross section: 48% +/-5; longitudinal: 15% +/-3 (measure in boiling water for 1 minute)
Paid around  :Rs: 90/metre for 72mm
         And  :Rs: 30/metre for 30mm
Tiny Things, But very usefull, Specially in our hobby.. :thumbsup:
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: VC on February 02, 2014, 10:47:36 PM
Neat! Useful stuff. Can also be used to waterproof components in boats / hovercraft and especially submarines. Will be looking out for this item in the 'For Sale' section. Please PM me if you are open to it.

Regards.
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: umayash1 on February 02, 2014, 11:01:10 PM
Lol.. Not a problem sir..
But need to check with the seller again, Update you by Tomorrow..
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: Sandeeppande on February 03, 2014, 12:18:29 PM
Looks like a good/alternative to heat shrink tubes (known to me), please do let us know the source.

Thanks
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: sundaram on February 03, 2014, 12:40:54 PM
I am too in for the same in Sale Section.  Nice Stuff. Thanks for Sharing.
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: umayash1 on February 03, 2014, 01:21:58 PM
Available.. PM me the Qty..
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: umayash1 on February 03, 2014, 10:34:24 PM
@Sundaram:- Packed, Will ship it to you by tomorrow.. :)
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: umayash1 on February 04, 2014, 04:40:22 PM
@VC:- Parcel Shipped!!
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: VC on February 04, 2014, 11:34:09 PM
That was fast! Thanks.
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: sundaram on February 08, 2014, 01:09:51 PM
Super stuff Tanmay.  Thanks for helping.
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: RCNeil21 on February 08, 2014, 05:14:03 PM
So sir how to use this? Similar to normal heatshrink tubing?
Just apply heat over it directly(like on open flame?) or is there a certain method this has to be shrinked on to desired product?
Title: Re: PVC Heat Shrink Wrap Tube for DIY Batteries, ESC's Etc..
Post by: umayash1 on February 08, 2014, 05:53:34 PM
Check This Out:-
From 1:56-1:36, Exactly the same method..
http://www.youtube.com/watch?v=vkDgoXikI_8# (http://www.youtube.com/watch?v=vkDgoXikI_8#)
Text only | Text with Images