HITEC HS-5065MG DIGITAL METAL GEAR PROGRAMMABLE SERVO &  HITEC HPP-21+ SERVO PROGRAMMER
Servo Specs
Detailed Specifications
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (4.8V): 0.14 sec/60° at no load
Operating Speed (6.0V): 0.11 sec/60° at no load
Stall Torque (4.8V): 24.99oz/in. (1.8kg.cm)
Stall Torque (6.0V): 30.55oz/in. (2.2kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
Dead Band Width: 2usec
Motor Type: Carbon Brush
Potentiometer Drive: 6 SliderIndirect Drive
Bearing Type: Top Ball Bearing
Gear Type: Metal Gears
Connector Wire Length: 7" (178mm)
Dimensions: See Schematics
Weight: .42oz (11.9g)

Programmer Specs & Product Description
The HPP-21 Plus Digital Programmer and Servo Tester allows you to access all the programable features from your PC or at the field.  
Features
PC and Field Programmer for Hitec Digital Servos
Digital Servo Field/PC Programmer and Tester
Programs all Hitec Digital Servo Parameters
Tests all Brands of Servos
Free Downloadable Software
USB PC Connection
with this programmer you can set the
ROTATION DIRECTION OF SERVO
END POINTS OF SERVO
MIDDLE POINTS OF SERVO
set servo to stretch full 180°
many more plz read manual at hitecrc for more features...


Servo QUANTITY :: 8 price 2200 each
Servo Programmer :: 3000

Hi, do you still have the HPP-21 servo programmer available?