Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree one pair

- Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.

Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)

Good upto 3Kg Plane


Rs 1500.00 (for one pair)

Type: 2409-12
Weight:65g
Size:?31*62.0
Output Axis:M3
Current:8.2A/12.7A
BATTERY: 3-4 cells Lipo
KV:1570
Io:1.2A (10V)
Internal resistance:0.065O
Max Efficient Currency:9A
Recommended Working Currency: 7A - 20A ( Efficiency higher than 75% )
PROPELLER: 8x4 APC/9x4.5 APC

ESC with BEC

a. 3 cell Lipo: APC 8*4SF 11100RPM 10V 20A Thrust 805 gram ( Air pressure 76mmHg/25 degree)
b. 3 cell lipo: 9X4.5APC-E 9900RPM 10V 23.8A Thrust 960 gram ( Air pressure 76mmHg/25 degree)

Rs 1500 (for motor, ESC, & prop)

Turningy 3648 - 1450Kv Brushless Motor

Dimension: 36mm x 51mm, 70mm(with shaft)
Weight: 181g  (kv1450) (not including connectors)
Diameter of shaft:?strong>F5mm
Length of front shaft:?strong>F19.1mm
Lamination thickness: .2mm
Magnet type: 45SH

Specification:
No. of cells: 3-6S
RPM: 1450kv
Max efficiency current: 45A-50A
No load current: 11.1/4.6A
Current capacity: 70A/20sec
Internal resistance: 0.010ohm

Max performance;
Voltage: 3-6S
Prop: 7x5, EDF90
ESC: 60A
Thrust: 1450-2300g
Power: 1600W
For EDF 1500~1800g model airplane.

Rs 1400

Hobbyking 70Amp ESC

4 to 6 Cell LIPO
Constant Current 70A
Burst Current 80A
No BEC

Rs 1200

Turnigy nano-tech 5000mah 4S 25~50C Lipo Pack

Capacity: 5000mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 25C Constant / 50C Burst
Weight: 523g (including wire, plug & case)
Dimensions: 159x49x33mm
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector

UNUSED with original box packing

Rs 2600

Quote from: softlink on July 12, 2015, 10:35:17 AM
Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree one pair

- Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.

Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)

Good upto 3Kg Plane


Rs 1500.00 (for one pair)

SOLD

SOLD all above items

only available

TowerPro BM2409-12T / 25A BEC / 8x3.8 Prop Combo

 I receive my parcel yesterday .nice packing nice items .thanks sir .all items are new and very good condition     

HEY where is your new thread for ESC NTM MOTORS ECT

DO NOT KNOW HOW YOU MISSED THIS POSTING

TowerPro BM2409-12T / 25A BEC / 8x3.8 Prop Combo

Type: 2409-12
Weight:65g
Size:?31*62.0
Output Axis:M3
Current:8.2A/12.7A
BATTERY: 3-4 cells Lipo
KV:1570
Io:1.2A (10V)
Internal resistance:0.065O
Max Efficient Currency:9A
Recommended Working Currency: 7A - 20A ( Efficiency higher than 75% )
PROPELLER: 8x4 APC/9x4.5 APC
ESC with BEC
a. 3 cell Lipo: APC 8*4SF 11100RPM 10V 20A Thrust 805 gram ( Air pressure 76mmHg/25 degree)
b. 3 cell lipo: 9X4.5APC-E 9900RPM 10V 23.8A Thrust 960 gram ( Air pressure 76mmHg/25 degree)

Rs 1500 (for motor, ESC, & prop)

HobbyKing 30a Blue Series ESC     4 in no

Cont. Current: 30A
Burst Current: 40A
Battery: 2-4 Cell Lipo / 5-12 Cell Ni-XX
SBEC: 5V/ 3A Output
Size: 23*43*6mm
Weight: 28g
Simon K Firmware FLASHED

Rs 800 each

NTM Prop Drive 2826 1200kv motor       4 in no

Model: NTM Prop Drive Series 28-26A 1200kv
Kv: 1200rpm/v
Max current: 17A
Max Power:215W @ 12v (3S) / 286W @ 15v (4S)
Shaft: 3mm
Weight: 57.6g
ESC: 20A
Cell count: 3s~4s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Prop Tests:
7x6E - 11.1v - 90W - 8A       
7x6E - 14.8v - 192W - 13A             
8x4E - 11.1v - 100W - 9A
8x4E - 14.8v - 222W - 15A
8x6E - 11.1v - 145w - 13A

Rs 900 each

HTX900 9g Servo      4 in no

• Plastic Bushing
• 25cm wire
• Coreless motor
• Servo arms & screw included
Size : 21x12x22 mm / 0.74x0.42x0.78 in
Voltage : 3v ~ 6v
Weight: 9g / 0.39oz
Speed : 0.12 sec/60(4.8V)
Torque : 1.6kg-cm
Working Temp : -30C~60C
Gears: Nylon White type

Rs 250 each

KK 2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA

Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Singlecopter 2M 2S
Singlecopter 1M 4S

Rs 1800

i need retracts 

i have retracts complete set of two pls let me know ifr you interested my  contact no. is 9582766207 will whats you the pictures mint condition