Hi,
I have a NIB Phoenix Piper Cub EP for sale. The model is in box since i brought.
Price: Rs. 6000 + shipping on actual (No speedpost shipping)
Technical Data
• Wingspan: 1520mm (59.8in)
• Length: 990mm (39in)
• Weight: 1600g~1800g
• Radio: 4 channel - 3 servo mini
Feature
• Covered in genuine ORACOVER
• Accurately-etched panel lines and factory-applied paint scheme
• Fully detailed, factory-installed canopy
• Can be flight ready in just 2 to 4 hours
• Fiberglass cowl
• Extremely lightweight laser-cut all-wood construction
• 95% factory built, covered and painted
http://phoenixmodel.com/Default.aspx?mode=view_detail&CatId=23&id=66
(http://phoenixmodel.com/upload/Product/Picture/PH070---Piper-Cub-Chinh.jpg)
Note: I shall upload the actual box pictures by tomorrow.
Pm sent!
Not mentioned anything about engine ? Or is it electric model ? What exactly is in box would help make the decision better.... Thanks
Why don't you read the post carefully? EP means what? And the link given is the manufacturers page, and he has said unopened box
Hi all, just an update I have that Piper Cub assembled and flying she's a beaut am using Emax 2820-06, 11X5.5 prop 60Amp esc and 3C 11.1V get flight time of 8/10 mins. Have made minor mods -- have fixed windshield canopy with magnets to access battery leads, have added air intakes with plastic spoon scoops and needed to enlarge cowl for motor slightly and added addition motor mount ply to allow for easy mounting of motor only prob faced was ensure all connectors included linkages be thread locked with blue 242 including prop adapter alan screws on motor... had prop loosen out after 2nd flight... very stable flyer and easy correctable banking and turns doesn't need any compensation and most of all superb gliding.... have fun ... bought thru RC dhamaka Bangalore will add pic in near future
@anand you paid no taxes or you wish not to include it @ price.. by the ways its a nice plane but one confusion, 1 servo for ailerons or 2 because i have seen in forums people are using 4 servo setup .. )
I have uploaded the pics on https://plus.google.com/photos/116884434868752662194/albums/5857289572935379473?authkey=CJHZ5LuI6KjD_QE (let me know if you are not able to check it)
It required 4 servo's and motor suggestions are:
AXI motor 2814 or 2820 / Emax 2820-06 / 3536 1400kv
@avesh: SR sir brought this from Malaysia so no taxes on it.
I have following members in interested list
1 - @prateek13
2 - @Aeroresurrect
3 - @GE
any of the above member confirm the purchase by evening, i shall be selling to respective member based upon the interest order.
thanks,
anand
Hi, I got the confirmation from GE. Model sold to GE.
Thanks for showing interest.