Guys,

I am selling my assembled/un-assembled* Tarot 680 Pro Hexacopter for a flat Rs.1,00,000/- I will also throw in a few free items worth Rs. 40,000/- along with the copter. Have received a DAN (Drone Acknowledgement Number) from DGCA for this one.

I AM NOT PLANNING TO SELL THESE AS INDIVIDUAL PARTS. Approximate market cost of the parts used in the Hexacopter is also attached as an image for your reference. The cost of freebies are not included.

The parts I have used are as follows:

1.   Tarot 680PRO HexaCopter Folding Frame 3K Carbon (https://www.amazon.com/FY680PRO-Foldable-Hexacopter-Carbon-Multirotor/dp/B01E3JPE5Y)
2.   DJI 2.4G Bluetooth Datalink (https://www.bhphotovideo.com/c/product/1012238-REG/dji_2_4gbt_2_4_ghz_bluetooth_datalink.html)
3.   DJI Naza-M V2 Flight Controller (https://www.dji.com/naza-m-v2/feature)
4.   DJI iOSD Mini (https://rcmumbai.com/dji-iosd-mini.html)
5.   SUNNYSKY V4006 740 KV Brushless Motor (https://sunnyskyusa.com/products/sunnysky-v4006-motors)
6.   TATTU 6200mAh 4S 35C LiPo Battery with XT60 Connector (http://rcduniya.com/product/rcmumbai-tattu-6200mah-4s-35c-lipo-battery-with-xt60-connector)
7.   Original HobbyWing XRotor 40A ESC's
8.   Original TBS TRIUMPH RP-SMA 5.8 GHz (https://www.team-blacksheep.com/products/prod:tbs_triumph)
9.   Generic 1355 3K Carbon Fiber Propellers 13inch CW CCW CF Props (https://hobbyking.com/en_us/multirotor-carbon-fiber-propeller-13x5-5-black-cw-ccw-2pcs.html)
10.   Matek PDB-XT60 w/BEC (5V and 12V) (https://www.foxtechfpv.com/matek-pdb-xt60-for-rc-multirotors.html?gclid=CjwKCAjw4_H6BRALEiwAvgfzq-tLhwJZnqlGYydd5ZBrvGS4m7z5pfKMvu8mLnycw3EIZ2cyOTjMCRoCAukQAvD_BwE)
11.   Panasonic FM Series 35V 1000uf Ultra Low ESR Capacitor (For filtering out noise during video transmission)
12.   TS832 5.8G 600MW 48CH WIRELESS AV TRANSMITTER (https://robu.in/product/ts832-48ch-5-8g-600mw-5km-wireless-audiovideo-transmitter-fpv-rc/?gclid=Cj0KCQjwhvf6BRCkARIsAGl1GGgWO8wCgeYDA2SSOrwcB4wLyNlNqySSzWmY8ts5rQYkITt6hpjLeqoaArFCEALw_wcB)
13.   TAROT TL3T05 GOPRO T-3D V METAL 3-AXIS BRUSHLESS GIMBAL FOR GOPRO HERO 5/6 CAMERA (https://robokits.co.in/drones-quad-hexa-octa-fpv/gimbal-for-camera-drone/tarot-tl3t05-gopro-t-3d-v-metal-3-axis-brushless-gimbal-for-gopro-hero-5-6-camera)
14.   Matek RGB LED Board 5050 12V (https://robu.in/product/rgb-5050-12v-led-board-7-colors-dip-switch/?gclid=Cj0KCQjwhvf6BRCkARIsAGl1GGie8Px181Zwtb6UfVIailoKB0kPDm_ZnlOmsvZvZCUmQ0ngYpD7jeUaAmyrEALw_wcB)
15.   Super Bright Xenon Strobe Light (http://rcduniya.com/product/banggood-xenon-strobe-lamp-flashlight-automatic-for-rc-fpv-racing-drone)
16.   RunCam Eagle FPV Camera (https://www.getfpv.com/runcam-eagle-2-16-9.html#:~:text=The%20RunCam%20Eagle%202%20is,800TVL%20resolution%20and%20excellent%20latency.&text=Improved%20Global%20Wide%20Dynamic%20Range,most%20other%20traditional%20CMOS%20sensors)
17.   Canopy Kit for Tarot 680 PRO (https://www.flyingtech.co.uk/frames-props-parts-accessories/tarot-680-pro-carbon-effect-canopy-fitting-kit)
18.   V4006 Motor Quick Release Adapters for Carbon Fiber Propellers (https://www.aliexpress.com/i/32703051342.html)

I will throw in the following items as FREE along with the above drone since I am no longer using them:

1.   Original FrSky Taranis Q X7 Transmitter with upgraded hall sensor gimbals, Lithium Ion battery and carry case (https://www.frsky-rc.com/product/taranis-q-x7-2/)
2.   EACHINE EV800 5 Inches 800x480 FPV Goggles (Can be used as a standalone FPV monitor on tripod as well) (https://www.amazon.com/EACHINE-800x480-Goggles-Raceband-Auto-Searching/dp/B01FDGN8LI)
3.   Original iMAX B6 Charger with power supply (https://www.skyrc.com/iMAX_B6_Charger)
4.   Noise Play Action Camera (https://www.gonoise.com/pages/noise-play-action-camera)
5.   Tarot TL65B44 Small Electric Retractable Landing Gear Set (https://www.banggood.in/Tarot-TL65B44-Small-Electric-Retractable-Landing-Gear-Set-For-650-or-680-or-690-RC-Multi-Rotor-Drone-p-979455.html?cur_warehouse=CN)
6.   Generic Generic RC832 Receiver with antenna (https://robu.in/product/rc832-plus-5-8g-av-receiver/)
7.      Few miscellaneous parts like ESC's, UBEC's, Plastic Propellers, Carbon Fiber Propeller Balancer, Braided wire guards, Heat Shrinks, Bullet Connectors, etc.

*I am unable to ship the hexacopter in an assembled state outside Trivandrum due to its overall large size. So if anyone can come and directly pickup can take the fully assembled RTF hexacopter. If you are from outside Trivandrum, Kerala, I will painstakingly dismantle everything and will ship all the parts and freebies in a box.

Adding more photos

Adding more photos

Adding more photos

Adding more photos

Adding more photos

Adding more photos

Adding more photos

Adding more photos

Adding more photos

Anyone interested may please contact me on Whatsapp on 9847002881. 

Open for best offers..Throw in your best offers guys . Detailed parts list is also attached with product links

Everything sold ! Closing this thread. Thank you!