RC India

We're going to release this product in India, which prices $190 for PROMOTION, excluding the camera mount in the pic and freight cost. only accept payment through Paypal, at most 2pcs for each person.

size
width: 57cm
length: 57cm
Distance of motors: 45cm
Height : 25.4cm
Weight & payload
Body weight: 620g
Payload:400g
Maximum Takeoff Weight: 1,100g

Propeller
Material: Plastic
Propeller size: 10inch * 2
Anti-rotating Propeller : 10inch * 2 Motor
Bushless Motor: (IFly2212)11.1v
Drive Configuration: direct drive for each axis
Governor: 15A digital governor
Camera Mount
Camera Mount with vibration isolation
Material: carbon fiber
Number of axes: single axis Working environment
Ambient Humidity: <%80
Ambient temperature: 0-60 (Celsius degrees )
Ambient wind speed: < 4m/s

This is an ARF item with self-designed FC, definitely performing better than any other $190 quad-coptor, come and equip your RC/battery to try it on, Please tell your friends if you're satisfied with it and let us know your question/complain if you're regret spending $190 for it.
Please contact me if you're really interested in it, Tristan Tan at .
And you could find more pic and vedio from:www.idea-fly.com (http://www.idea-fly.com),
Thanks for your attention.

Five days left before promotion ends up(on 3/25), then back to $285(without camera mount and shipping cost), hurry up please, clock is clicking.....

Promotion is ending up and price back to normal. please be noted.

Weight & payload
Body weight: 620g; Payload:400g; Maximum Takeoff Weight: 1,100g;

Motor:
Bushless Motor: (IFly2212)11.1v; Power:200W;
Drive Configuration: direct drive for each axis
Governor: 15A digital governor

Size:
width: 57cm ; length: 57cm; Distance of motors: 45cm ; Height : 25.4cm

Built-In Functions:
Low Voltage Protection ; 2-axle Gimbal Support;

Peripheral: Fixed Quadcoptor;

Supported ESC output : I2C (200K)

Recommended Transmitter : Radio compatible to PWM output, 6 channels at least.

Assistant Software System Requirement : Windows XP SP3 / Windows 7

Working Voltage Range: MC:4.8V~5.5V

Power Consumption : MAX1. 5W (0.3A@5V), Normal:0.6W (0.12A@5V)v

Operating Temperature:  -10°C ~ 50°C.

Working environment: Ambient Humidity: <%80, Ambient wind speed: < 4m/s

Weight : MC:25g

Dimensions : MC: 45.5mm x 31.5mm x 18.5mm

Flight Performance:
Max Yaw Angular Velocity: 190° / s
Max Tilt Angle: 45°

Sensor: 3-axis gyro + 3-axis accelerometer, can be upgraded to 9DOF.
Props dimension: 1045 10inches props*2pcs and 1045 10inches Anti-rotating *2pcs.
Props material:Plastic
Parts replaceability: Dedicated to Idea-fly products
FPV availability: Compatible but not included.

Optional:
Camera mount($40/pc): Camera Mount with vibration isolation,Material: carbon fiber,Number of axes: single axis,
Battery($20/pc): 3s'2200 mAH, Maximun 15mins for free flying, 10min for burdened flying（1030g,including camera,PTZ),$15/pc freight cost for additional batteries as ristriction on inflammable material.

Packaging option:
I: Big and colourful package:
Including IFLY4*1pc($285)+Camera mount*1pc($40)+Battery*1pc($20), unfolding then ready to fly. Total $425 for delivery free to India.

II: compared to I, excluding battery, packed in small package, need to assemble props after unfolding, then ready to fly. Total $375 for delivery free to India

III: compared to I, excluding battery and camera mount.packed in small package, need to assemble props after unfolding, then ready to fly. Total $335 for delivery free to India

All original parts out of our factory in Shenzhen China, total different quality to other places like GLB.
For the small package, it could easily be assemble after reading the manual.

Please contact me if you need me:
Google our videos or check out our websites:www.idea-fly.com (http://"http://www.idea-fly.com") for more. thanks.

Please be noted.  :giggle: It seems that NO ONE is interested on this forum @ $ 199 or @ $ 425. We have INDIAN hobby suppliers who can provide much better stuff at much lesser prices.

We are building similar Quadcopters (without camera mounts/consoles) and flying them for as low as $ 98. Are you game to compete? If not, try your luck / business gimmicks  elsewhere.

By the way, have you heard of a company by the name www.hobbyking.com? They are based out of Hong Kong, China. You might want to check their prices for comparable products. :giggle:

Well, we're not selling the same staff, if you don't have one on hand and experienced it

Quote from: VC on March 28, 2012, 12:32:08 AM
We have INDIAN hobby suppliers who can provide much better stuff at much lesser prices.

+1

This thing has a cool head, though. Like a batman mask!

Quote from: Swapnil on March 28, 2012, 08:09:54 AM
This thing has a cool head, though. Like a batman mask!

Good catch, are u wanna be our first customer in India? you know, 1st is different and important.

More pic

more pics

One thing i can say honestly that it looks really stunning. It seems this product is available on goodluckbye.

Quote from: Dharmik on March 28, 2012, 07:46:15 PM
One thing i can say honestly that it looks really stunning. It seems this product is available on goodluckbye.

Sir, that's total different with what i posted here, we improved the material imported from German, i don't want you to be hurt by those previous poor frames selling on GLB, all parts out of our factory in China, thanks.

Quote from: Idea-fly on March 28, 2012, 06:50:43 PM
Good catch, are u wanna be our first customer in India? you know, 1st is different and important.

I'd love to have this stunning bird! But right now I'm just an engg. student. Maybe a few years later...

What caused your hesitant? what can i do for you? thanks.

Quote from: Swapnil on March 28, 2012, 09:03:45 PM
I'd love to have this stunning bird! But right now I'm just an engg. student. Maybe a few years later...

If you don't try, you will never get a chance, especially for young man

Yes sir, I am a young man with lots of enthusiasm but lot less money. And it's going to be a few years before I catch a healthy earning source.
In the meantime, I was wondering if you could send over a free promotional sample!   ;) ;D

 :giggle: :giggle: :giggle:

Hmm, hard sell tactics being used on the forum? I don't think I've seen this before. All the best Swapnil!

Quote from: Swapnil on March 29, 2012, 07:52:19 AM
In the meantime, I was wondering if you could send over a free promotional sample!   ;) ;D

I am guessing you will write a VERY positive review of it here once you receive it ;D

Who are the Indian suppliers of this type of products? I was interested in photography which I exited to be in RC. Would love to be back.

Is AP allowed in India? read some old posts but there it has been said that you need permissions to do the same.

Whats the status now?

Quote from: anwar on March 29, 2012, 11:49:33 AM
I am guessing you will write a VERY positive review of it here once you receive it ;D

Oh, yeah! Not just positive reviews, for a free sample, I'd do all the advertising and promotions in this region!   ;D
Heck, I'll even learn Mandarin if it comes to that!  ;D ( 能否请您发送​​免费样品 ) ;D

What ya say, Idea-fly?

Edit: "Could you send a free promotional sample" in Mandarin!

Quote from: mail4ajo on March 29, 2012, 12:11:24 PM
Who are the Indian suppliers of this type of products? I was interested in photography which I exited to be in RC. Would love to be back.

I second that! I am currently building a 250 Size Quad using HK's KK MultiQuad board and the entire cost is coming close to $150, and the frame is only FRC (fiber Glass).
Who in India is giving such a quality looking 450-500 size BNF Quad at this price ? May be Wooden Frames which are crap for Quad application (having a very wide range of resonance). This looks like an incredible deal, and had I already not bought all the parts, I would have gone for it!!

1. 500mm CF Frame. Huge for normal Point and Shoot Camera!!
2. Matching color of Motors and Skids.
3. Stunning Canopy.
4. All electronics (except Rx,Lipo) included (I assume).

Only thing to see is the credentials of the Controller board and shipping to India.

Quote from: Swapnil on March 29, 2012, 07:52:19 AM
Yes sir, I am a young man with lots of enthusiasm but lot less money. And it's going to be a few years before I catch a healthy earning source.
In the meantime, I was wondering if you could send over a free promotional sample!   ;) ;D

I would like to but i'm not allowed, and i knew young Indians are always working hard just like i watched in the movies, am i right? never give up your dream.

Quote from: mail4ajo on March 29, 2012, 12:11:24 PM
Who are the Indian suppliers of this type of products? I was interested in photography which I exited to be in RC. Would love to be back.

So far, no distributors in India selling IDEA-FLY products, and nobody tells me he would like to.
All parts are out of our factory in China.

Quote from: SideWinder on March 29, 2012, 12:15:35 PM
Is AP allowed in India? read some old posts but there it has been said that you need permissions to do the same.

Whats the status now?

You should be able to access to, just have a try.

Quote from: Swapnil on March 29, 2012, 01:21:00 PM
Not just positive reviews, for a free sample, I'd do all the advertising and promotions in this region!

We don't offer this option here, thanks.
BTW, are u using google translator?

Hey, I was just joking! I did use google translator. (hope it didn't translate wrong) :)

Your product and pricing is good. I really wish I had enough money to buy this stunning quad.

I hope your efforts yield good results for you!

@Idea-fly
You have got really nice product out there. I am sure you will get huge customer base in near future. It's just started. I wish you all the best.

Quote from: Swapnil on March 29, 2012, 11:00:15 PM
Hey, I was just joking! I did use google translator. (hope it didn't translate wrong) :)

Your product and pricing is good. I really wish I had enough money to buy this stunning quad.

I hope your efforts yield good results for you!

Yes, the translator works well..LOL. thanks man for your kind words.

Quote from: Dharmik on March 29, 2012, 11:49:57 PM
@Idea-fly
You have got really nice product out there. I am sure you will get huge customer base in near future. It's just started. I wish you all the best.

I'm certain glad to hear what you commented here, we'll keep going. thanks.

Battery

Sphere Hobbies brings you a complete solution for any AP project. We are distributor for DJI. At this time we also have introductory promotion against advance order. Visit our website www.spherehobbies.com/india