http://imgur.com/EjHE4WA
Was going to build a 250 racer but have decided against it. The following parts are unused/brand new.
1) EMAX Multi copter motor MT1806-2280KV ( 2xCW, 2xCCW) (650/- each)
-Motors have 2mm bullet connectors soldered onto them
-Will provide original box they came in
2) ZMR250 frame + bottom plate PDB (1400 + 700 = 2100/-)
-PDB plate comes with 5V regulator, buzzer, header pins, nylon spacers, OSD PCB and LED lights with on/off switch
-ZMR250 has some light scratches near the nuts/bolts because I had to use a wrench to tighten them
-Does not come with XT60 pigtail in picture
3) QK LiPo (11.1V 35C/70C 1500 mAh) (800/-)
-Unused
4) Deans connector to 4 x 3.5mm bullet connector breakout cable (350/-)
-Unused
5) 4 x Hobbwing X Rotor 10 A OPTO ESCs (680/- each)
-Please note the power wires were shortened a bit
Shipping cost is now included.
If someone from Pune wishes to purchase the built quad, then I will sell it to them at a discounted price (first priority). Otherwise everything will be sold separately at first come first serve basis.
Could you post pics of ZMR frame, and where you purchased from?
Link is in the main post: http://imgur.com/EjHE4WA
Frame purchased from Robu.in and PDB plate purchased from quadkopters.
Prices reduced.
Motors: 500/- each
ESCs: 500/- each
Frame + PDB: 1800/-
Lipo: 700/-
Connector: 300/-
Pls see PM
Everything except the breakout cable has been sold.
3) QK LiPo (11.1V 35C/70C 1500 mAh) (800/-)
-Unused
Payment transferred as discussed.
Interested in the frame. Please let me know if its available
Quote from: bhaveshsangani on April 17, 2016, 11:03:34 PM
Interested in the frame. Please let me know if its available
Hey I replied to your PM too, everything has been sold (except breakout cable). A new ZMR 250 frame is available at robu.in.
Hey i am from pune and wants an 11.1v 3000mah or higher battery urgently pls do help