Sale of a few Used and some New Items

Started by shobhit17, October 18, 2015, 08:28:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

shobhit17

I have a few motors which I do not wish to use and some other items.  I am looking forward to put them on a same here.  The items could be posted to the buyer by either speed post or the registered post.  Do let me know if anyone is interested..... they are:-
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

shobhit17

#1
Turnigy D3536/6 1250KV Brushless Outrunner Motor - Used for just over a year....

Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 1250kv
Max current: 34A
No load current: 3A
Max power: 500W
Internal resistance: 0.034 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/10x5  14.8V/9x4.7
Max thrust: 1270g
Rs 700 + Postage




Battery Monitor - NEW

Simple & easy to use!
A perfect solution for when you're at the field and not sure if your battery is charged!
The BMON6 plugs into your battery balance plug and will quickly tell you the total voltage as well as each cells individual voltage.

Important.
This item is not accurate enough for precise cell balance checking. It is to be used to check battery charge status.
For ultra accurate battery cell balance status, try our Japanese built Cellmeter.
Rs 200 + Postage



Turnigy D3530/14 1100KV Brushless Outrunner Motor - Used for about a year but flown just a few times.

Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 22A
No load current: 1.6A
Max power: 315W
Internal resistance: 0.077 ohm
Weight: 73g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x30m
Prop size: 7.4V/12x6 14.8V/8x4
Max thrust: 1100g

Rs 600 + Postage





Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

rajeev.dhruv


shobhit17

I have used the 1250 KV motor on my Sharma kaiser most of the times and it has done extremely well.  Both on 3 cell and 4 cell lipo.
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

shobhit17

#4
Friends I am also selling my Battery Charger which I brought for my field requirements and also used it for a while as my main charger.  It has been used for just about 4 months and not much as it was too hot here to go for flying..... not more than 20 off cycles of charging done on it as of now.....

The specifications of the charger are:-

The B405 Pocket Charger is one of the smallest field chargers around. B405 offers all the functionality of your regular charger in a pocket sized package, weighing in at only 110 grams!

The B405 charges battery types such as NiCd/NiMh 1~10s, LiPo/Life/Li-ion 1-4s, Pb 6-12v and provides 45 watts of power in a charger that literally fits in the palm of your hand.

Features:
• Ultra compact and lightweight DC field charger weighing just 110g
• Charges battery types NiCd/NiMh 1~10s, LiPo/Life/Li-ion 1-4s, Pb 6-12v
• 45w 4.5A charging power
• 100-9900 mAH capacity charging
• Peak Detection for NiCd/NiMh CC/CV lithium
• 180min fast charge safety timer
• 10mV per cell Lithium balancing accuracy  

Specs:
Input Voltage: 10~18v DC
Charge Rate: 0.1~4.5A
Battery Types: NiCd/NiMh 1~10s, LiPoly/Life/Li-ion 1-4s, Pb 6-12v
Weight: 110g
Dimensions: 110 x 83 x 39mm

Package Includes
B405 Charger
Handy Storage case
Instruction Manual
Balance board and lead


COST  ----- Rs 1700 includes packing and postage by regd post
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

shobhit17

Rajeev Dhruv............ Both motors sold to Dhruv...... waiting for you to pay for the motors....
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...