RC India 6th Year Sweepstakes

Started by anwar, June 10, 2015, 07:33:59 PM

Previous topic - Next topic

0 Members and 9 Guests are viewing this topic.

Darshan for multirotors

It's sad that I won't be able to participate in the sweepstakes because of exams ... :banghead:
best of luck guys
put your heart in flying and flying will never leave your heart

topalle

Last time, I couldn't participate due to the same reason...
Don't lose hope... you have next year...
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

anwar

Quote from: prasad.chodankar on June 12, 2015, 08:17:05 AM
Wouldn't a competition be better than a lottery ?   :headscratch:

Deep inside my mind, I want newcomers to win.  Not veterans with mucho skills aided by disposable income.

The way the sweepstakes are designed allows the disadvantaged a fair chance (thus in line with my ulterior motive).

The only thing we INSIST on is that the rules are followed at every stage.  The builds have to be documented from the beginning to end with newspaper dates multiple times, and the maiden video should clearly show the article in rest, going into motion and staying in motion in a single continuous shot.

Basically, we want to see FAIRNESS in the entries. Please spare us from having to second guess the authenticity of anything !
Hangar : Please see my introduction.
RC India forum and me : About this forum.

pushpreet

This is absolutely great.
Finally a sweepstake I can participate in.

Though its sad that a multirotor will only get a single entry :/

Anyway, thank you for the great opportunity Anwar Sir.
:D

prasad.chodankar

Dear Sanjay Rai / Anwar  
In no way was I questioning the judges.... or doubt the authenticity of anything.
 
My point is that a lottery system would deter people from doing something creative.....
Let's say If a person were to make scratch builds.... he would put in more effort (or at least be tempted) to make more number of different planes of average (or even poor) build quality, just to increase his chance in the draw.......... rather than making one build of very good quality (that would bring out the talent in him).
 
I agree that participation needs to be increased....... but we also need to encourage creative thinking.... and come up with new ideas.
 






P.S. Maybe, you could think of organizing a competition also in the future...

jana.f22

3D addict

sanjayrai55

Prasad, I think you need to have more confidence in the management of the sweepstakes. Have a detailed look at how last years went. If you put your heart into it, there will be rewards. If you participate only for the prize, you will lose every which way

anwar

Quote from: prasad.chodankar on June 12, 2015, 03:29:31 PM
My point is that a lottery system would deter people from doing something creative.....

It is quite startling to me is that money is the real motivator for creativity ;)  I thought it was mostly human nature.

The creativity and competition we want is for people to scratch build instead of putting together ARFs. There is enough incentive here for the same.  If anything, a full balsa scratch build should have a 10x multiplier, similarly if you soldered a quad controller from scratch.  Other than that, we seem to be have the right mix of competition and possibility for everyone.

Plus the logistics of doing a proper competition over the internet would get quite interesting. It is easy to throw ideas out there, but taking responsibility for fairness is not easy when the entire business is conducted online.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

sanjayrai55

+1 Anwar bhai. Well said indeed. Increased participation, development and promotion of the hobby - these are worthy goals, not monetary rewards.

The essence of the competition is trust - who can check whether someone gets their model made by a professional or other?

Darshan for multirotors

+1 to both Anwar sir and sanjay sir
put your heart in flying and flying will never leave your heart

sanjayrai55

Administrator - Request that the Sweepstakes be opened from midnight tonight. Reason - tomorrow (14th June) is a Sunday, so some work can commence  ;D ;D

anwar

Original post updated to include the weekend ;)

Waise bhi... chotee chotee guthakiyaan maaf ho !
Hangar : Please see my introduction.
RC India forum and me : About this forum.

kiran rc

So can we start a new thread for sweepstakes now? ???

And is there under 19 age category this time?

sanjayrai55

Thank you sir  :thumbsup: :thumbsup:

Chote chote gustakhiyan are ok, but we are scared of the big bad Idi  :giggle: :giggle:

Darshan for multirotors

Sad that there is no under 19 category. . Well anyways I am not participating :'( :'(  >:( :banghead:
put your heart in flying and flying will never leave your heart

satyagupta

I will be participating this time :)

I was planning to build tri copter but now i will built that as my entry to sweepstake. I am not aiming for any prize money just for fun i am participating :)

All the best to everyone and have fun in building and flying.
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

sanjayrai55


VTOLkarthik

is redesigning of a quad can be accepted??
I will be using few parts from my previous quad and upgrading it with new design... so can I enter sweepstakes??

I have build a canopy for my quad which am planing to redesign...

Let me know If I can participate...

Regards
karthik

kiran rc


anwar

#44
Quote from: VTOLkarthik on June 14, 2015, 06:44:28 PM
is redesigning of a quad can be accepted??
I will be using few parts from my previous quad and upgrading it with new design... so can I enter sweepstakes??

Please post.  There is not enough information to give you any kind of informed response.  There will be reviews of all entries at the end by multiple people, and decisions will be taken on the merits of each case.

Overall, in terms of guidelines, we want to see clean fresh builds.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

VTOLkarthik

#45

OK...
Got it... I will put up the post, let the jury decide.... :)

anwar

In the 6th Sweepstakes we are including a small 'contest for non-powered flight' suggested and paid for by a member. The rules are simple:

1. The objective is to achieve a 1 minute duration flight.
2. Model must be unpowered, ie no engine, no motor, no edf, no rocket/jetex. However, rubber power is allowed.
3. Must be scratch built, ie no RTF, no ARF, no Kit. Start by capturing pictures of the material you are starting with, alongside a newspaper for verification.
4. No restriction on size or weight or materials used.
5. Flight may be performed outdoors or indoor.
6. Take off/launch and landing must be at about same level, ie, flight from a rooftop to ground not acceptable.
7. Our usual sweepstakes rules apply. Especially proof of build and continuous video from launch to landing.

This is aimed mainly at those new to the hobby and hence not yet having a radio set. However, a radio controlled model is eligible.

Remember it is not a competition against each other, rather an attempt to achieve a set goal.

There is a token prize of Rs 1000 worth of goods from LHS of your choice, for each of the first five successful entries received. That is Rs1000 each going to 5 different people (which also implies the same person cannot win twice!).


The main post is being updated with this information.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

Darshan for multirotors

Sorry sir but I think that 1 min with a rubber band or something like that is highly improbable ... I was trying for an ornithopter but I don't know or just frame it like this ..I am not sure that it will fly for long
put your heart in flying and flying will never leave your heart

aniket210696

@darshan check out this guys channel ...


The models and flying is just beautiful.. <3
.

sanjayrai55

I remember about 45 years ago I built a Mercury model from a kit from Indias Hobby Centre. About 50~60" span, it was a rubber-powered sailplane. Flights of 10 minutes plus were not unusual if it caught a thermal! The rubber motor was basically to gain height.

One unique aspect was the prop. You carved out half a prop from a block of balsa, and the other side was a wire, on which you added lead weights for balance  :o