Quote from: sahilkit on April 23, 2015, 09:55:40 PM
Hi Sanjay.

The reason i asked you about HS-311 servo is because of horror stories i keep reading on servo failure (resent production) at RCG or RCU etc sites.

Coming to standard servos options are becoming less and expensive  .

Quite possible. There are a lot of duplicate servos around. The ones I am using are pretty old, over 10 years

A good option is HK 5010 (double ball bearing) from Hobby King. I've been using them for some time now without any problem.

Hi sanjay,

If its not much trouble can you post a direct link. I searched HK site but could not get info.

Was it HXT 6.9kg / 39.2g / .16sec Twin bearing Digital Servo or TowerPro SG5010 RC Standard Servo Motor Digital BB Double Ball Bearing ?

Sahil

checkout these futaba s3003 servos look suspicious.

http://www.snapdeal.com/product/futaba-futaba-s3003-servo-motor/515196293?utm_source=earth_feed&utm_campaign=682_686&utm_medium=101600768&vendorCode=Sb0043

http://www.amazon.in/Robodo-Electronics-Futaba-S3003-Servo/dp/B00MTFO9VA?tag=googinhydr18418-21&kpid=B00MTFO9VA&tag=googinkenshoo-21&ascsubtag=ee7dc56a-37a6-4969-8075-8c1ab125cc40

Sahil

HK https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=3743

http://rcuniversal.in/index.php?route=product/product&path=246&product_id=1683

QuoteHope you got the point.
He's quite a senior chap (in many ways), guys, in case you didn't know.
I address him as Rai saheb, if you have noticed...

sorry missed this post  , okay rai saheb it is.

Rai saheb i have picked up few petrol fuel filters and want to know if i can use them for fuel-can building.

When you say Fuel Can do you mean your onboard tank or your fuel bottle in your caddy box?

First check the compatibility of the filter, especially that plastic housing, with nitro fuel (If your need is for a 'Gasser' ie Petrol engine they should be fine) Soak for a few days and see the effects

Normal nitro fuel filters consist of a fine mesh in an Aluminium housing, and are not very expensive

http://www.hobbyking.com/hobbyking/store/__7668__Fuel_Filter_Nitro_Glow_D4xd9_5xL25mm.html

Its for fuel bottle in the caddy box. Okay will do that test and see how it goes.

These cost me Rs 6/- each

Hello Sahilkit.... for all your Glow Plug engine queries and help... I will recommend that you contact Vivek Sharma of Sharma Aeromodels at Jodhpur.  The number is available on this site... all you need to do is search by name of Vivek Sharma.... of go to RC Gems and look for Sharma Model Aeroengines or Hangar S.  Thats a one stop shop for most quality items required by us aeromodellers.  He may not have much on the website but on phone the order can be placed after contacting him.

Hello Shobhit,

I have his number, spoke to him couple of times and send a email with the list of items i wanted to buy but nothing moved forward. So decided to place an order for just the props from there online store.

Sahil

Sahil

PM your list. or email it to .

It would take about 15 days to get any OS glow engine part you need.

Regards,

Sphere Hobbies
Ahmedabad
India
+91-99251-20630

Ok... Sahilket... I will also talk to him and give him your concerns...