Does anybody stock klotz synthetic oil in India?
Or else is there other synthetic oil available in India for Klotz replacement?
Do you want for glow or gas engine?
I need it for glow engine for Monstor Truck
Mobil Glygoyle Series should be freely available. Its a polyalkylene glycol lube. However if your really looking for a high performance lube to lower the oil content in your fuel then mobil jet oil 2 is your solution its a Polyolester (POE group V).
@flying truck............. From where I can source Mobil Glygoyle Oil or Mobil Jet Oil ? Pl help if you have any dealer details.
Mobile jet oil 2 is a bit tricky. Mobil Glygoyle can be bought in chennai at affiance enterprises http://www.indiamart.com/affianceenterprises/products.html#mobil-glygoyle-series-air-compressor-oils
I'm sure there are similar dealers in your state. Mobil Glygoyle is a PAG compressor lubricant (try a AirCon mechanic) there are similar lubes from other manufacturers as well just make sure the viscosity is right for your application ( viscosity of Koltz KL198 75 cST @40C, Koltz KL200 is 200 cST @40C) and its "polyalkylene glycol".
Thanks a lot "flying truck" .... Will search here in Pune.
I am zeroing on "Mobil Glygoyle 220" from below details. Your expert comments are highly appriciated.
-------------------------------------------------------------------------
Come across thread in RC Group @ Motul Micro100% synthetic lubricant specially formulated for 2 stroke engine model vehicles:(model cars, boats, planes, etc...).
Entirely miscible with nitromethane, methanol, ether...
MOTUL MICRO can be mixed with methanol, nitromethane or etheraccording to the following proportions
(15 to 20% depending on the use and manufacturer'srecommendations) :
MOTUL MICRO 15 - 20%
METHANOL 70 - 75%
NITROMETHANE 10%
Adjust dosage according to your own use or experience.
PROPERTIES
Red colour.
Density at 15°C / 59°F 0.998
Viscosity at 40°C / 104°F 180 mm2/s
Viscosity at 100°C / 212°F 30 mm2/s
Viscosity index 213
Flash point 224°C / 435°F
Pour point -35 °C / -31°F
whats the max rpm of your truck engine?
I have heard that KL 200 doesn't work over 13k rpm Motul micro has similar viscosity. you need something KL198 which will be Mobil Glygoyle 68
http://www.rcfuelsupplies.com.au/index.php?_a=viewProd&productId=54
http://www.rcfuelsupplies.com.au/index.php?_a=viewProd&productId=55
I do not think motul micro is available here.
Engine specs
Output ----1.1 bhp@32000rpm
Practical RPM ----4000~40000
Displacement ----2.95cc
Bore ----16.5mm
Stroke ----14.0mm
Weight ----258g
Ports ----3Port
there your engine exceeds the 20k rpm limit for glow engine 13k limit for gas engines of Kl200. So you need a lower viscosity oil, something close or lower than the KL198
This is great learning about Synthetic Oils.
I will look for "Mobil Glygoyle 68" as suggested by you. :hatsoff:
Will be in touch with you if further help required. :thumbsup:
I'm not suggesting the oil i'm merely pointing you to the suitable substitute available in India :)
i have klotz oil 1600 per ltr if u want call me 9699996111
Hi pintu pl. Provide klotz type 198/200
Sent from my GT-I9100G using Tapatalk
its type 200 & i have rappicon ready fuel also
Quote from: pintu on April 07, 2012, 07:43:52 PM
i have klotz oil 1600 per ltr if u want call me 9699996111
1600 is an obscene price, even after paying the shipping from US. You can buy Ready to use Nitro fuel from Tornado at lower price at RC SkyHobby, Rotor etc.
There is a chemical manufacture in Chennai, many people here in Bangalore are using his Synth Lube
http://www.rcindia.org/fuel-and-engines/where-to-get-nitro-fuel-in-noida-5800/
Zenith Industrial Supplies, SP Road : They are dealer of most of Loctite/Mytlock product. I got all my Locktite from them
http://www.justdial.com/Bangalore/zenith-industrial-supplies-%3Cnear%3E-s-p-road/080P7084