hello frnd..i have a nitro and methanol 15 engine made by toki..i am unable to start it please help me,
Edit
Deleted in view of far better response from girish sarwal
Yadwender
I have a few of these engines... here is my experience
- 80% meth and 20% castor. a little nitro will help.
- open the high speed needle about 4-4.5 turns
- the air bleed lsn needs to be turned in till wherever it goes
- priming up needs more turns than OS. ensure fuel is being sucked into the carb. once it reaches the carb opening, atleast 6-7 turns, you will feel the engine is oiled up
- these engines need about 5-6 tanks to break in and need a highly rich setting during break in
- keep a starter ready, flipping by hand will be tedious
- starting needs a rather strong flip, bring it to the compression and give it a strong tight sudden flip, it should start
- everytime you start, you have to richen and after starting adjust the mixture
- these engines do not start easily when hot and oiled up
- the carb is made of some composite material, overtightening the screws will kill the threads, so do not overtighten the needle socket or other screws
All the best
GS
thankx bro nd give me your mobile number to concern more details..
Two videos of the toki engine break in. Yours is similar one right?
PMed my phone number.
Second tank, running rich full throttle
http://www.youtube.com/watch?v=yS9CJ8qW2d8# (http://www.youtube.com/watch?v=yS9CJ8qW2d8#)
Seventh tank, running tuned, full throttle
http://www.youtube.com/watch?v=8VywaDJmGZY# (http://www.youtube.com/watch?v=8VywaDJmGZY#)
Girish sure makes it look easy :D :D
Who took the video?
sanjay wht u thnk which is the best and simle way to start nitro engine?
Quote from: sanjayrai55 on September 21, 2014, 07:47:49 PM
Who took the video?
talked the wifey into it... I'm learning, slowly :D
Hey Yadwender
Sorry missed your call. Any luck roaring up the little cub?