'2016 Sweepstakes' Funster 40

sanjayrai55 · November 30, 2016, 07:54:03 AM

The song goes, "Seal it with a Kiss" I seal with hot glue

Next: Wing

sanjayrai55 · December 02, 2016, 08:28:27 PM

sanjayrai55 · December 02, 2016, 08:29:19 PM

sanjayrai55 · December 02, 2016, 08:30:25 PM

Wing is made from 4 mm Corro

sanjayrai55 · December 02, 2016, 08:32:15 PM

A strong base for main L/G

sanjayrai55 · December 02, 2016, 08:34:40 PM

Ailerons & Flaps are 2" by 15 mm thick balsa.

Standard (45 gm ) Servos for Ailerons, and 19 gram MG for Flaps

sanjayrai55 · December 08, 2016, 05:55:01 PM

sanjayrai55 · December 08, 2016, 05:56:19 PM

sanjayrai55 · December 08, 2016, 05:57:41 PM

sanjayrai55 · December 08, 2016, 05:58:46 PM

sanjayrai55 · December 08, 2016, 06:00:06 PM

samayaraj · December 08, 2016, 07:47:50 PM

Nice built Mr. Sanjay!

I made my first RC plane with landing gear and it got broken after few flights. Due to landing gear damage my whole fuselage is getting damaged. Then after I made RCs without landing gears. All were belly landing models.

After seeing your models, I am planning to use landing gears. I like your fabricating techniques.

sanjayrai55 · December 09, 2016, 07:04:11 AM

Thank you

But I haven't yet installed the main L/G, though I have fitted the base for it

sanjayrai55 · December 15, 2016, 06:02:00 AM

sanjayrai55 · December 15, 2016, 06:03:43 AM

sanjayrai55 · December 15, 2016, 06:04:49 AM

sanjayrai55 · December 20, 2016, 12:33:50 PM

sanjayrai55 · December 20, 2016, 09:04:15 PM

sanjayrai55 · December 20, 2016, 09:11:06 PM

sanjayrai55 · December 23, 2016, 12:20:58 PM

sanjayrai55 · December 23, 2016, 02:17:37 PM

Ready for maiden. A long build

sanjayrai55 · December 23, 2016, 02:18:59 PM

sanjayrai55 · December 23, 2016, 02:20:22 PM

sanjayrai55 · December 23, 2016, 02:22:57 PM

sanjayrai55 · December 24, 2016, 06:37:18 PM

On the field, ready for maiden