I had bought the AP 0.15 from HK yet to be mounted on a model. AP 0.09 is gusty's. which is one of the very nice small engines. easily starts with just hand flick of the prop. has good power too. Not really measured the RPM with Prop sizes next time we run it, will update some more info.

Yesterday we mounted the AP 0.09 on one Gusty's foamy piper cub bought from HK. The ARF was itself very nice made of EPS and with all necessary hardware, excluding electronics. The piper was meant for electric but we mounted the AP 0.09 on it . Engine started with some effort because not run for some time, and cold climate. However once started it just continued till tank empty like a charm.

Maiden may be tomorrow.

Gusty would request you to do the honors of posting the photographs and video clip please.


PS : we were early for the sweepstakes. now we have to build one more I suppose  .

Coro Trainer with Hornet Ap .15 engg Auw 978g . Wing 276g. fuse,servo,engg,prop,tank,wheel etc 702g.

Superb!!!!   

Very Nice and neat build. If any flight videos will be really appreciated.

Me and Gusty are well known for our poor quality flight videos 

Quote from: sundaram on February 15, 2013, 05:30:51 PM

Me and Gusty are well known for our poor quality flight videos 

head tilt to blame

Head tilt is only with me Gusty. Yours is "never in the frame" Photographer struggling to keep up. 

Coro Trainer with Hornet Ap .15 engg flying video

www.youtube.com/watch?v=DFlEBOMBDnk&feature=youtu.be

That was some beautiful flying. Very nice ly made plane, well balanced and neat trim.   

Thanks sundaram

One more 1/2A glow specifically build by me and my son towards sweep stakes.

http://www.rcindia.org/gas-glow-nitro-planes/build-and-fly-idol-laser-cut-kit-890mm-from-hobby-king-with-12-glow-engine/new/#new

Though this is not exactly an 1/2 A glow Size Engine this is a second Kit build Laser Cut Stick Kit with an AP 0.15 Glow Engine  we are building

http://www.rcindia.org/gas-glow-nitro-planes/build-and-fly-laser-cut-stick-kit-from-hk-with-ap-o-15-glow-engine/new/#new

Today I came across a wonderful site with lot of plans for 1/2A Glow models. Instantly I have downloaded all the plans which were neat.

http://my.pclink.com/~dfritzke/index.html

This a Photo I came across in rcgroups.com Nice build this is what I am building next for my other cox 0.049





http://www.rcgroups.com/forums/showthread.php?t=1856116&page=2

Very old timer type

Yes Sir I have really started loving the way IDOL is flying. Thats why making one more model like the one above with cox.

Today we flew IDOL in some wind condition too. it was fantastic.

Fantastic. Btw, do you use nitromethane in the fuel? Cox used to teccomend a high %age

Sent from my GT-S7562 using Tapatalk 2

must be 10-12%

All borrowed from Gusty 

Good ole Gusty 

http://www.rcindia.org/gas-glow-nitro-planes/build-and-fly-log-airboss-kit-sig-models/msg175279/#new

@sundaram


i want to buy these engine.in india  where can i buy these engine.    

Quote from: sundaram on May 06, 2013, 11:50:17 AM
must be 10-12%

All borrowed from Gusty  

Talking nitromethane.
You borrow from Gusty ten times as much as i borrow from Harveer!

Incidentally, when we were running Cox Babe Bees, we hadn't even heard of nitro!
We just ran 80:20.
One 3 in 1 can of fuel lasted one entire Sunday! Whether C/L or FF

@wingmanbunty
What do you want to buy?
Cox engines?
There is a long history. You can find it on the net.
Try. You will enjoy.
We got our first Cox .049 in 1968-69.
Still have 1 or 2.

@ wingmanbunty

If you have Paypal then the second store Ex-Model Engine is a sure supplier to India.

http://stores.ebay.ca/XENALOOK/Cox-Engines-/_i.html?rt=nc&_fsub=21108637&_sid=476927475&_trksid=p4634.c0.m14.l1513&_pgn=2

http://stores.ebay.com/EX-Model-Engines/Cox-Engines-/_i.html?_fsub=301143012&_sid=817916422&_trksid=p4634.c0.m322

Hobby King is also a new source of Cox engine

http://www.hobbyking.com/hobbyking/store/__251__55__Gas_Glow_Engines_parts-Glow_Engines.html

In ebay.in you can get one at slightly higher cost within India.

http://www.ebay.in/itm/Powerful-Canadian-Cox-Surestart-049-Model-Aeroplane-Airplane-Heli-Nitro-Engine-/281292865173?pt=IN_Toys_Games_School_Stuff&hash=item417e5c7e95&_uhb=1

@sundaram sir,
$60-90 for a Babe Bee? Wow.
I think i'll just stick with my 40 year old originals.
That always turned 6x3s without nitro as we never had any.
Even flown RC single channel with a tired .049 turning a Tornado 7x4 after lot of persuasion.

Found some props.
But where, oh where are my beloved Cox's?
Mills 0.75 waits in her plastic bag for some diesel fuel to turn up...