Hi,
I'll be using this space for the build & Fly Log of Newly arrived 3DHS 89 AJ Slick.
Also I Would Definitely try to make it to the end & share every possible details as I haven't posted further in some of my previous logs due to strict schedule.

So Here I go.

Specifications
Winspan: 89"
Length: 91"
Wing Area: 1500 Sq. Inches
Weight 17-19 lbs.

Parts list
Engine: DLE-61
Servos: JR 8911 All Around, JR ES579 High Speed Servo On Throttle.
Radio: JR XG 8 with JR RG831B - 8 Channel.
Battery: 1 X Pulse 2100Mah 2S LiFePo4 Receiver Pack, 1 X Thunderpower 2S Lipo for Ignition.
Kill Switch: RCexl Optical Kill switch.
Extensions: Hitec Heavy Duty Extensions.
Tank: Aeroplus Ideal 500MLGas Tank with Tygon tubing for Gas, 380Ml for Smoke.
Prop: Carbon Fiber Mejzlik 23X8
Switches: Hitec Heavy Duty.
Secraft Arms
RcExl Smoke Pump
Truturn 4" Carbon Spinner

Thanks,
Tanmay..

Pictures Out of the box.

Great one. All the best

All the best ...

Elevator

The servo mounts on the Horizontal Stab were all pretty straight forward stuff. Mount the servos, center them and install the aluminum arms with blue locktite on everything. I used Secraft 2" JR Aluminium Arms. I paid careful attention to tying back the wires so they would never interfere with the arm movement. The servo cut-outs fit the JR 8911 servos perfectly.

Servo and Linkage

Okay So here are some more updates on Build.
Under Carriage
Tail Wheel Assembly
Rudder Servo Installation 

All are Pretty straight forward as well as easier to work with because of utmost quality.
Fuselage is almost 150% Bigger then other standard 50-70cc Models but stands with the lighter construction.

Rudder
Rudders are always a little tricky and this one was no different.
I've Used the 3.5Inch Secraft Aluminium arm with 120% Travel as it needs 4".
But you wont be required not more than 45 Degrees of throws on this one for both precision and 3D.

...

...

Wings
Again, all the normal stuff. Hit the area around the servo holes with a trim iron, cut out the covering and install the servos. Center and add arms. I used Secraft 2" Aluminium Arms, With Push Rod installed on 1.75" & 120% Travel.

Aileron servo detail

Custom Made Jersey Can for Smoke Oil

Item Used:
Proquip 5L Fuel Can
Turnigy Electric Fuel Pump
Anodize Aluminum Fuel Fitting from HK
Heavy Duty Gas Tubing
3S 2200Mah Lipo
10cm X 15Cm Ply Sheet

Fuel & Smoke Tank

I've used 500Ml Aeroplus Clear Tank for Fuel & 500ML Tank for smoke oil Supplied with the Kit.
Also used the 3mm Ply underneath both of the tanks for Re-enforcement.

Done with the test flight few days back, here are some Setup Pictures!

..

Good Show Umayash

Will be travelling via Bhopal to Indore soon

Welcome Anytime sir, I am also planning to fly at Indore with Harveer Bhai & Gang anytime soon. Lets meet up there.

@rcpilotacro,
Gusty sir,
Tanmay and Harveer will let you fly LARGE models.
On mode 1.

For Mode 2, there is only yours truly to offer:
3D (Magic)
Bipe (Tiger Moth)
Elec sailplane (Sunbird)
Aerobatic Glider (Pilatus B4)
Three of which you've flown before!

Long awaited by ALL of us...

Edit:
Tanmay, please forgive sidetracking your thread...

Some Pictures of 3DHS Slick in Action

...

Here is the Video.
Watch In HD.

www.youtube.com/watch?v=NakkFg1X5HU&t=46s

 
Superb flying

 
Awesome flying !!!