Beautiful build Sanjayji.....how is the Jig made are the stoppers pinned down .

Quote from: Rooster on September 30, 2018, 07:21:42 PM
Beautiful build Sanjayji.....how is the Jig made are the stoppers pinned down .

Thanks buddy. The jig uses thumb screws to hold down in place

Sent from my Moto G (4) using Tapatalk

Lovely Sir,  The model flies very well.... and guess you indeed took it to the limits....... The expression on the face of the pilot says a lot about it....

Don't know how I missed seeing the videos for 3 entire days.

But I remember you started this thread with "I got a canopy..."

What a difference the canopy and pilot make, even to an otherwise professionally finished model.

All I can say is "Sirji, abhi aap me kafi dum baki hai"

An inspiration for many (including me) to talk less and build more!

Regards

Quote from: shobhit17 on October 03, 2018, 11:15:11 PM
Lovely Sir,  The model flies very well.... and guess you indeed took it to the limits....... The expression on the face of the pilot says a lot about it....

Hah ha! Thanks so much Shobhit!

Quote from: K K Iyer on October 03, 2018, 11:53:17 PM
Don't know how I missed seeing the videos for 3 entire days.

But I remember you started this thread with "I got a canopy..."

What a difference the canopy and pilot make, even to an otherwise professionally finished model.

All I can say is "Sirji, abhi aap me kafi dum baki hai"

An inspiration for many (including me) to talk less and build more!

Regards

Thanks so much Iyer sir

The Canopy was affordable ( about $ 6~7) so I got it and the printed plans (about $ 5) shipped to my sister-in-law's residence in USA, and my wife had gone there and carried for me

Since even the local shipping is expensive ( when you convert to IRS ) I ordered more stuff - the turtle deck, cowl and canopy of the Sig Kougar! That's going to be my next build, and the first I will be attempting without plans! (no plans available for the Kougar)

Sig Kougar

Something like this?

 

Now where did that come from?

Do you have any of the cutouts from the printed balsa/ply sheets?

OK, so I'm landing, a little hot. Model bounces up about 15 feet after touchdown. I'm supposed to go around and approach again; but I try to land nevertheless. The inevitable stall and crash 

The plane flew so well, I decided to restore it. Made a new fuselage and tail section

Really very beautiful build. You are so awesome Aeromodeller.

Thanks Arvind.

How's your Telemaster coming along?

 Sir
Now I am doing covering it, wing tip already changed. Then will check it fuselage . Telemaster sitting about three four year . now a days  flying field is very difficult to find every where cricketers, kite flyer ,then car learner . But despite these difficulties no one an stop to building or restoring our models.
with regards
Arvind Khare

Good luck

I thought Bhopal had some great places to fly, by the lake. I think I have seen photos of Tanmay there

Yes Tanmay and other younger Aeromodeller hired a field (about 30km away from Bhopal)and doing there  flying with 3DModel . But sir I am not 3D flyer I m "old monk ".  I have also float for Piper super cub ,done lots of float flying But now my team weaken, hope some day will again float flying.

 

Quote from: sanjayrai55 on February 28, 2021, 06:09:34 AM
The plane flew so well, I decided to restore it. Made a new fuselage and tail section

Great Job Sir ! Hard to believe its scratch build ! Color of coroplast you have choose matches very well to covering . I have 64 size ARF version of it and my experience is same , no trims require in flight and flies straight and true . 

Thanks Vinayak

Remaidened successfully today. Unfortunately no video, hopefully next time

Sent from my moto g(9) power using Tapatalk