MXS-R 70 3D Assembly Thread

[umayash1]

Hello All,
Uploading sum assembly pics of Goldwing MXS-R 70 3D..
Setup-
OS 55 AX
Hitec HS-475HB All around
Radio- Futaba 9CHP

T@nm@y

[umayash1]

more..

[umayash1]

...

[umayash1]

...

[umayash1]

...

[umayash1]

...

[umayash1]

 

[vishal]

Wow! This looks great.

[umayash1]

Thanks- Vishal..

[rcpilotacro]

Umayash
Good Build, isn't throttle servo throw less since your connection on the servo is on the inner most hole of the servo horn ? Just Curious, also remote glow once covered with the cowling needs frequent inspection, has the tendency to come off.

Needless to say a superb flier, just picked up a 30cc version  for your maiden

[sundaram]

Excellent Build 

Some flight video is awaited. 

[sravan]

Isnt it little underpowered for 3d with OS 55? R u using nitro?

[vineet]

wow and what about that plane in profile pic

[umayash1]

@Sravan- OS 55AX (2 stroke) is recommended engine for this plane.. Can also Put 70-90 size four stroke engine, @Vineet- Its a real cessna 172R..

[vineet]

and do not tell me you have that also

[umayash1]

LOLZz..

[shadman_alam]

this model deserves a fourstroke.. and or electric.. . if u are looking for 3d .. 2stroke isnt the right option..

[sanjayrai55]

What a beautiful model. Very clean assembly, 

All the best for the maiden 

[umayash1]

After 50 Flights on OS 55AX,
Converted it into a Electric Setup.
Not tested Yet, But will upload the flying videos soon.

Main Aim is to do "Rolling Harriers" 

Setup:-
Motor- Turnigy Aerodrive SK3 - 5045-450kv Brushless Motor
ESC- Turnigy Brushless ESC 85A w/ 5A SBEC
Battery- Turnigy nano-tech 3000mah 6S 25~50C Lipo
Prop- APC 15X8

[Dr. Abhishek Agrawal]

Good Luck upload video soon

[sanjayrai55]

What sort of flying time would you expect on this set-up Tanmay?

[controlflyer]

nice build..

[umayash1]

@Sanjay Sir:- Expecting a easy 10 min of Hard 3D Flying,
AUW comes in tipping the scale at 4.8Lbs total with battery!
1,260 Watts at only 4.8Lbs give this beast a power to weight ratio of 262 watts Per 1 Lbs !

[sanjayrai55]

Excellent! 

Will be following this with keen anticipation

[rohit256]

beautiful ...........................