Hi people ,
I am taking up the IBIS 1.20 , 83" Wingspan 13" chord , Length 63" (incl spinner) as a summer project .
Firstly I'd like to thank RCDHAMAKA  
The parcel was shipped on 21st and reached me today (22nd) at 5 o clock . The parcel was extra carefully packed and all the parts reached with no damage ! Brilliant service !  

I will keep this thread updated with my progress on the model .

I am planning on installing -
- MLD 28cc gasser engine
- Hitec 5485HB's (x5)
- Hitec 72mhz receiver

The pictures of the unboxing will be uploaded shortly .

Thanks ,
Sahevaan

Guys im unable to post pictures ! :\

Anyways I was having a little trouble with getting the hinges in properly on the elevator . The dont go in fully , any suggestions ?

was eyeing this one, here is the vid

Yes , thats the one .

hi,

where is the IBIS 1.20 available, is it a ARF?

regds

Its an ARF , available at RCD !

Quote from: Sahevaan on March 22, 2012, 08:58:06 PM
Guys im unable to post pictures ! :\

Just get them under 200KB *BEFORE* you try to upload.

The unboxing

@anwar - Thanks I just realised one of the pictures wasn't resized .

...

Finished hinging the ailerons and gluing the wing together ! 

Pic of the fuse and wing .

Just started hinging of the elevator . Though the hinges dont push in completely ,  any suggestions ?

nice one Saahevan.

Well the hinges are'nt suppose to go all the way in. The surface areas should not FLUSH with the wing. There should be a very small gap for movement. However, if you feel that the hinges are not going in complete till the pin, you may want to deepen the slot using a hobby knife.

I was glad to see the subaru that I gave you in one of the pic.   M happy that its still alive..  

Hi Saurabh  , Yes the subaru is in top condition ! It was flown last around 4 months ago . Hopefully will fly it on the 28th or 29th again !

The gap in the elevator hinge (pic 0617 ) is little extra . It took lots of time and effort to get the hinges of the elevator in place . Only the left side is done as of now . Will do the right side and the rudder later .

Few more questions ,
How to get the elevator aligned exactly right ?
There are plastic sheets supplied for the windows , do I cut them and fit them from inside or not cut and stick them on the outside ? Also for the front windsheild plastic , how do I get it to the correct shape ?

Thanks ,
Sahevaan

Hi guys ,
made lots of progress on the build . The plane is almost ready , just the engine has to be mounted .
I will be putting a Saito FG-21 on this one , a four stroke gasser and not the MLD - 28 !
Will post pictures soon