hi,,
i have built a a coro cub.plan taken from spadtothebones.com (Presently www.spadtothebones.net )
dont have much of built pics.
still some pics to show..
regards.
hitesh..
pics
more
what a nice built!!!!!!!!!
some more
more..
more
Very nice built..... {:)} {:)} {:)} {:)} {:)} {:)}i wish i could achieve this precision ... :bow: :bow: :bow: :bow:
Good Finishing. Cover window with OHP transperent paper and will look like Glass window.
Cover window side with thin black color tape just like rubber lining.
But what is the white colored inside fuselage ? White coro ? (in Hanger 040.jpg). Or Styrofoam ?
Is wing from 3mm Coro or 2mm coro?
And what is your airframe weight ?
thanks for replying.
@kalyanprodhan..sir i have alredy covered the windows with very thin transparent polycarbonate sheet.sir entire fuse from inside is reinforced with 3mm sunboard and plywood formers.
wing is made from two combinations..blue coro for base is 4mm and top yellow coro is 2mm.inside it has a wooden strong spar..
my auw is around 2700grams.
regards..
hitesh
{:)} {:)} {:)} {:)}
Nice build ....loved dis design been waiting to construct it :hatsoff:
Hitesh babu, mazaak uda rahe ho? How can you call my Avispad a "very nice built"? :rofl: It is amateurish when compared to this beauty.
Superb Build brother. Fantastic!! I have so much to learn from you. I am spellbound.
A touch of real class, after a long time. ( No offence meant or intended to other fellow modellers.)
@VC sir please dont embarass me.i get all encouragement from great people like you...
Just one suggestion. This beauty deserves something better than such a rudimentary reinforcement like this. It destroys the entire aesthetics. PLEASE do something about this. Suggest that you hide it by running it parallel inside a flute on a coro piece.
got it sir,will surely do it.actually sir,i have built this landing gear myself to save around 18-19$.and it works superb.i will cover it with a coro.
That is a true masterpiece.. Very good craftsmanship!! and a very admirable build. Hope she flies as good as she looks. BTW, if you have a 4S use it on this model.. 2s engines spits a lot of oil and makes the model dirty.
-Ismail
nice build {:)} {:)}
Superb...!!!! {:)} {:)}
thanks all for your comments
regard
hitesh
Hitesh
i think you have made a mistake in mounting the engine, you have mounted the engine on tip of the cowling. Cub's fire wall is right below where the front wind shield ends. remove this and push the engine back to the intended firewall. looking at your build she should fly with .25 easily. the weight you have indicated is with the engine isn't ? that also explains why she took off and fell back to the ground, she is extremely nose heavy
sir thanks for replying..
the plan i referred to says the engine should be mounted at the position where i have mounted.also i saw a hanger 9 piper at a fellow modeller's place to see how the engine and fuel tank is mounted on it..i even took 3-4 snaps and then mounted mine engine..
regards..
hitesh
Hitesh, thats a beauty !!! {:)} builds like these are gonna attract more builders to SPAD building ;D Way to go man!
thanks samlikespad..
ya coro models are real fun to build..
regards..
hitesh..
i have already done its maiden.there is some issue with the engine.so i have to change it.once i do it ,i will upload the flight video.....
Congrats on the maiden! Which engine you had in it and with which you are going to swap?
it has HB.40 installed on it right nw.but the engine is not much powerful to lift the plane.i am planning to put asp.52
tuning the hb 40 for hitesh
http://youtu.be/ZIv8vCFPGqU
Maserati sir i am building the same model, i want to ask how many servos u had installed for ailerones and elevator ? ( as not specified in plan )
and as i used white coro for whole construction what material should i use to make it yellow??
please help :headscratch:
superb man :D :salute:
awesome {:)} {:)} {:)} {:)} {:)} :salute:
plz also upload video of test flight and overview :salute:
awesome no words for this build :salute:
looks real :salute:
:bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow:
what is total cost of this build :Rs: :Rs:
:hatsoff:
:bow: :bow: :bow: :bow: :bow: :bow:
:thumbsup:
Thanks a lovely built one.... Great
Tushar, you would need 5 Standard Servos, 2 for Ailerons, one each for rudder, Elevator, throttle. For yellow, it is a problem. Paint doesn't stick too well on Corro, tends to peel off. Can use Monokote or other Heat Shrink film.
@ 2.7 Kg that is a very heavy build. Will fly, of course, with a 52 to 60. The sunboard killed it - it adds a lot of weight, but not much strength. A better idea is Corro doublers with the flutes running crosswise, only where needed