This is Ver One of Goldwing Edge 540 25%

PowerPlant     XYZ 26 CC 16x 8 Prop

Servo            Sanwa 94851high torque on all Futaba 3004 on throttle

Futaba 8UHP with Frsky Module, High Volt Rx, two LiFe 6.4 Volt Batt without powerbox,

Needed to be tail heavy slightly, larger fuel tank moved back therefore no standoff.

Flew 3 Sorties.

Thrust line was perfect,
16x8 isn't enough will change to 18x8 once broken in
Flew like expected nice and smooth, tracks well, snap was just about ok (flew at low throw), Hover lacked power, Blender was neat, KE will require some mix, bellying in, Roll will need to be mixed too, yawing a bit. All in all, beauty to fly

Some more pics

wow
Beautiful

Six more flights, Cowl will go in and may be some decals too (I hate extra decals though, well, will stick whatever came along)

You can see from the above pic, hardly any elevator for approach (Very Slight back elev for a three pointer Touch Down

kept CG at 113 mm as opposed to recommended 102 mm. inside pic

Thanks RCDhamaka, Karthik & Sanjeev. This one had to wait a really long time before taking to air

Mubarak ho Gusty, looks a pretty flyer!

Thank You sir, yes it is except for the power presently

Congrats Gusty Bhai! Hope 18x8 will give you more PaWWa!

Just at the commencement of a stall turn, aerial shot by Gaurav. This is when i had the cut and had to deadstick. This is at a place called Sacred Forest

Hope she is alright!

alive & kicking , deadstick landings are my favorite

  forgot to whom am talking to! My bad