After some long months, today got the opportunity to visit my RCI in relax.
And what i see, one more detailed, beautiful build from Sanjay Rai sir.

Sir keep your good work.

Thanks Manoj! 

@sanjayrai55,

Sirji, a small suggestion.
Don't post the pics of the entire build in one post.
Post the pics one at a time, as the build progresses.
Giving viewers a chance to respond at the intermediate stages...
Regards

Such builds are treat to eyes..... and tonns of ideas  & motivation to make models.

Nicely built too many techniques used... Hot wiring, balsa sheeting, Wing joining without spar to name a few.
I am one of the prevailed ones to see it in reality.

regds
Saurabh

Quote from: K K Iyer on September 16, 2018, 07:49:04 PM
@sanjayrai55,

Sirji, a small suggestion.
Don't post the pics of the entire build in one post.
Post the pics one at a time, as the build progresses.
Giving viewers a chance to respond at the intermediate stages...
Regards

Noted, sir.But needs more time

Quote from: rastsaurabh on September 16, 2018, 08:23:21 PM
Such builds are treat to eyes..... and tonns of ideas  & motivation to make models.

Nicely built too many techniques used... Hot wiring, balsa sheeting, Wing joining without spar to name a few.
I am one of the prevailed ones to see it in reality.

regds
Saurabh

Thanks Saurabh. Now you have no excuse not to build a scale corro model, especially as you are flying a 1/6 scale Corro Piper Cub

Rai sir after long time very excellent build by you specially balsa,coro and foam


Regards
Gaurang

Thank you Gaurang-bhai 

I made a servo tray. Normally I just glue 2 rails and screw the servos down on them. But this time I decided to go with the tray, so I could slide it forward and aft to set the CG



The white servo (19 gm MG) is for throttle, others are rudder/tail wheel and elevator

Assembling the fuse in the Jig

Cut out slots and matching plugs to locate the tail parts accurately

Love your jig.
If I had one, my fuselages would be square too
Instead of like Bananas  
Regards

Iyer sir, make a Jig. It's easy 

Push rods and formers

Turtle deck from 1.5 mm balsa and some 3 mm formers and longerons

Test fit

Lovely build! And the pilot has a moustache!

  Hi Girish

Covering of wing started

Beautiful build sir! 
Following the thread actively! 

Thanks Prabal