The wing is 51"span, with a sweep-back, 12"chord at the centre

I had inserted hardwood blocks into the foam before sheeting, for anchoring the main LG

Aileron Servos. Made a 3 mm balsa box, with a 3 mm ply lid, screwed down.

Drilled a hole through the foam, and put a PVC tube, for the aileron wire

How did the elevator and rudder become shiny white from brown??
I also don't see control surfaces on the trail.

They were covered with heat shrink film(generically Monokote)

The Rudder & Elevator are yet to be fitted on

What are the control surfaces made of??

Same, balsa covered with heat shrink covering film

Coming along beautifully sir!!

Thanks Prabal

i love that finish!!

Quote from: Mehul Anand on November 30, 2018, 11:18:49 AM
i love that finish!!

Mounting for turtle deck

Sent from my Moto G (4) using Tapatalk

Cockpit and turtle deck in place

Sent from my Moto G (4) using Tapatalk

Cowl

Sent from my Moto G (4) using Tapatalk

Guruji,
Baki sub chodo.
Yeh cowl kaise banaya?

Iyer sir, I bought it ready made! I bought the 3 plastic parts, Cowl, Cockpit canopy & turtle deck from Sig Mfg.

Then trimmed and painted

Trial assembly

Sent from my Moto G (4) using Tapatalk