Sweepstakes 2015 build adapted in corro, here it is.

Supra Fly 25 by Hanno Pretner. Plans from http://www.outerzone.co.uk/plan_details.asp?ID=4967

- Working plans drawn up
- Raw materials and hardware collated
- power system ASP S25 A-II Glow 2S
- prop 9x6

First cut today.

Auspicious beginning 

All the best 

Best of Luck 

Awesome sir... which motor and ESC are to you using

Thanks all.
Darshan this will be getting a glow engine asp 0.25

- fuse markings done
- fuse cut
- horz and vert stabs cut
- firewalls cut (painful to get round edges, hot glue will take care of less than perfect curves)


wing cut and fuse assembly begins early morning tomm.

ASP 0.25 came in yesterday from RCD. Engine looks gorgeous

updates:

- fuse dry fitted for check
- blind nuts fitted in firewall
- servo receptors added - Liked the inverted servo design saving a lot of space, the body of the servo goes under the faux decks
- engine readied for fitting and marking on fuse

Coming along well 

- fuse final fit - still need to add plywood box inside, will be done after wing markings. The turtle deck formers slot in from the bottom, slight margin left for accommodating  2mm corro + chart + vinyl sheeting
- firewall fitted
- engine setup for break in
- l brckets added to elevator for stability - i find L brackets allow for a nice resting surface for the stabs and provides strength to the empennage, which can be really weak in corro builds if not tethered adequately.

Great going friend....

Thank you gentlemen, nothing better than your encouragement,
on to wings now, while all the glues cure and the engine breaks in

Maybe a bit of extra strengthening needed for the engine mount on the fuse. IC engines have a nasty vibration and might collapse the thin coro and might fly off too. Not scaring you, but just a word of caution. All in all, I like the quickest building of coro models. All the best

100% agree. The fuse will get a lite ply box on the inside, attached to the firewall.
But only after the wing is made so the wing saddle can be cut correctly

Hurry up 

I want to see the Hanno Screw being performed : http://www.rcindia.org/rc-general-topics/hanno-prettner-living-legend-of-rc/

Great going Girishji.

Subscribed. Waiting for maiden video

Thank you Gentlemen,

Does not qualify as a build update, but took some time....Engine break in

Nice build sir 

Clean build Girish bhai

Updates

- wing panels
- tapered bottom for dihedral
- center joining block

Being around Sanjay Sir the building speed is rubbing on to you too Girish. 

Awesome clean build.   

Subscribed.

Thank you Sandy sir, Being around Sanjay sir is indeed beneficiary...

Suprafine build and model

Thank you Gusty sir,

more updates

- ailerons and landing gear blocks. The lg is on the wings.
- control horns affixed.
- fuse reinforcements cut, need to get wing profile on them now.
- made a field table in the meanwhile, the earlier one had an unstable footing.

Updates:

1. Wing closed
2. Aileron Servos attached.