This ARF Kit I picked up when I went to Pinjore this year. Came complete with everything required less the Engine and Servos.
(http://phoenixmodel.com/upload/Product/Picture/PH009---Extra-300S-Chinh.jpg)
Contents of the box are as below ARF pre-covered in neat trim with the CA hinges dry with all accessories. The Five servos in the picture are extra which I had bought for the model.
(https://lh6.googleusercontent.com/bi27iS4OK6tGT4XL9WyCMeyZ_9pWZaQNxLTYbJWZV5Y=w983-h553-no)
(https://lh3.googleusercontent.com/-CjK0kVb0AMg/U5Fn43L2ZbI/AAAAAAAACAQ/M23pvC_A1hY/w983-h553-no/20140601_213930.jpg)
The accessories which came with the model are
Engine mount with spinner and electric power system mounts.
(https://lh3.googleusercontent.com/-owFOZnCOAVo/U5Fn4UGumlI/AAAAAAAACAI/Fr3Z4JgAPqQ/w983-h553-no/20140601_214149.jpg)
Fuel tank kit.
(https://lh5.googleusercontent.com/-nskTL7ebH1I/U5Fn7k1VzFI/AAAAAAAACAY/4i-eT_Uqqyk/w983-h553-no/20140601_214157.jpg)
Under carriage with wheels and pants.
(https://lh5.googleusercontent.com/-DDlQljsezV4/U5Fn8GCvWWI/AAAAAAAACAg/ByXt5SA5s9o/w983-h553-no/20140601_214244.jpg)
please pm me your bank details and contact no
???
I think there is some misunderstanding here. This is not a for sale thread. I am not sure why you need my account details.
Sorry wrong thread
Engine mounted and all electronics setup.
(https://lh6.googleusercontent.com/-9CeqIVOmG_A/U5nUlIkk8tI/AAAAAAAACBI/GRd35tIl6xs/w958-h539-no/20140610_131904.jpg)(https://lh3.googleusercontent.com/sx6WuxjaOwTPVqEbZdt7txFPcTh5Q6gPorm6n7hvnSc=w958-h539-no)(https://lh4.googleusercontent.com/fsq2vgF2Omjx-TYZsOpPt7evMOANVbKsmar9LT96MHQ=w958-h539-no)(https://lh6.googleusercontent.com/bFuuCKVGG0oSEXxI54ys4cWXWIYfRWu8WIQor2tEjtQ=w958-h539-no)(https://lh3.googleusercontent.com/-RBykCgD_3sE/U5nUv8BG83I/AAAAAAAACCk/QEeHAPlPBDA/w469-h833-no/20140610_131956.jpg)(https://lh6.googleusercontent.com/-kDPtNu6tHxY/U5nUyZuHmQI/AAAAAAAACBw/tXBEbyLOohI/w958-h539-no/20140610_132033.jpg)(https://lh3.googleusercontent.com/-xuEd6nUur8s/U5nU0fVcNSI/AAAAAAAACB4/Bt3qEp0R9wg/w958-h539-no/20140610_132053.jpg)
www.youtube.com/watch?v=fLz3WR003jE (//http://)
Sundaram sir, why engine is mounted like that ??? ???
Its by design the engine mount is like that. The complete engine comes inside the cowl. None of the part is outside cowl except HS needle extension and Exhaust silicon extension.
The fire wall is also provided with the required degrees tilt to the right by design.
I have heard that 9cc NGH engine is difficult to tune is it true ??
The provided perry pump type which runs of the crank case pressure sure does add to the complexity, but once you know the system well it not that difficult. I have posted a thread dedicated to tuning and running this engine earlier.
Rajaram sir has same engine but he kept idle inside.
By "he kept Idle inside" you mean he is not using it?
Its neither like a glow nor a conventional gas with carb. Its tuning is very different, especially since it has a blunt Low speed needle for transition from low speed to high speed and the engine is using both venturi effect of the intake as well as the fuel pump for the fuel feed.
Mine now has a 12x4 prop and at WOT is able to reach 12100 RPM thats close to 3.6 Kgs of static thrust. Further it has good throttle response.
he brought 1 year back for Rcbazaar Mazda plane and its NIB. :)
You might want to look this thread up
http://www.rcindia.org/fuel-and-engines/review-ngh-engines-gt9-(9-07-cc)/ (http://www.rcindia.org/fuel-and-engines/review-ngh-engines-gt9-(9-07-cc)/)
Engine Tuned and Cowl Fitted ready for its Maiden
(https://lh6.googleusercontent.com/-gyNOnJs5m1g/U59B-YID3hI/AAAAAAAACCw/hL_NDFV8UC0/w958-h539-no/20140616_105751.jpg)(https://lh6.googleusercontent.com/-Z9WyNY-nAv0/U59CBk2SHpI/AAAAAAAACC4/KSTlSGzI4xk/w958-h539-no/20140616_105813.jpg)(https://lh6.googleusercontent.com/-LOqpgI_FtxU/U59CEWx33vI/AAAAAAAACDA/fSNUu-JFjpY/w958-h539-no/20140616_105850.jpg)(https://lh3.googleusercontent.com/-0UUT3MxFjTM/U59CHYrGc9I/AAAAAAAACDI/4_LiOaG3hK0/w958-h539-no/20140616_105900.jpg)
(:|~ (:|~ eagerly awaiting the maiden report :thumbsup:
Thank you sir
Really Great Sir Love your projects :)
Thanks Aman
Congrats! Sundaramji..... Good luck with it and awaiting maiden video!
Lovely plane Sandy sir :bow:
PS: We should meet up more often, esp yourself and Sanjay sir.. he has been giving away planes after maidens... maybe he can convince you to donate this to me :giggle:
Thanks Samil. Thanks Girish. Will definitely feel comfortable when it is in the hands of Expert Test pilot of BOLT
www.youtube.com/watch?v=fHJLHpUAQXc (//http://) (//http://) (//http://) (//http://)
Unlike most of the days yesterday It was running inconsistent at Full RPM however the engine died mid flight only once when I was trying vertical unlimited. Luckily I had gained sufficient vertical height by that time to recover and land safely in dead stick. When it did not start for the third takeoff was when I realized the Fuel line to pump pressure was leaking and had given away totally by then.
The engine was stripped yesterday to replace the connecting rod which had also developed play during one of over size prop test runs some time an year back. The engine has once again become tight because of new position of the piston rings. ( Yes was surprised to note this Engine has piston rings unlike all glow engines) I have to break in again now.
Congrats Sundaramji {:)}
Nice safe landing sir {:)} {:)} :thumbsup:
:thanks: Samil Bhai. Some day will fly like you too. ;D.
Thanks Sanjay Sir.
Is this model for sale Mr Sundaram?
You should be able to buy it from RCdhamaka in some time. This one is not for sale. :)
very good model sundaram sir
Thank you for the reply. Happy landings.