Text only | Text with Images

RC India

RC Models => Helis => Topic started by: cyromanish on August 08, 2012, 08:31:50 PM

Title: about HK600 GT
Post by: cyromanish on August 08, 2012, 08:31:50 PM
PLZZ give the link for gyro and servo needed for hk 600gt on hobbyking....
thanks
:hatsoff:
Title: Re: about HK600 GT
Post by: Hellyflyer on August 08, 2012, 11:29:08 PM
SERVO

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=18399&aff=141210


GYRO

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=15318&aff=141210

Best Combo. Go for it
Title: Re: Re: about HK600 GT
Post by: srivatsa on August 11, 2012, 09:00:05 PM
Is there any difference between the gyro in the above link and this one ?

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10113
Title: Re: about HK600 GT
Post by: rajathv8 on August 11, 2012, 10:28:55 PM
The Hk401 is compatible with both analog and digital servos while the GA250 is compatible only with digital servos.
HK401 is a pizo based gyro and GA250 is MEMS based.

Please correct me if i am wrong :)
Title: Re: Re: about HK600 GT
Post by: srivatsa on August 12, 2012, 06:23:00 PM
Hk401 costs more than ga250 ...
Which one its superior?

I thought hk401 is Better for hk600 than ga250
Title: Re: about HK600 GT
Post by: vinay on August 12, 2012, 07:17:52 PM
Are you seriously building a HK 600? I got tired upgrading parts on the 500CMT. 

A 600 can be a dangerous machine. I am not saying the above gyros wont handle it. But better be safe. Both are decent Gyros for a 450 and upto an extent 500. But for a 600, I would opt for a decent one. Considering the amount of $$$ that goes into shipping and building these. Not to forget the power these beasts have. A decent tail servo and gyro should be a priority.  Just my 2 cents.  :)
Text only | Text with Images