Here will be post the build log of the helicopter and problem if any .
Equipment used :
-Mikado Mini VBar
-NTM 1700Kv 6s Motor
-Castle ESC
-TGY 306 Servo for Cyclics
-Futaba 9257S Tail Servo
-Orange Rx
Ordered the kit from RC711.com Via DHL Delivered in 3 days.
Had Exams so I kept the kit from past one month and now i'll build it ;D
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0076_zpsa3a862e6.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0076_zpsa3a862e6.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0081_zps760494db.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0081_zps760494db.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0084_zps16e5c819.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0084_zps16e5c819.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0077_zpsa9c750fd.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0077_zpsa9c750fd.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_172529_zpse7713fb7.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_172529_zpse7713fb7.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_173450_zpsf735b7cb.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_173450_zpsf735b7cb.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_173512_zps8ba56b48.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_173512_zps8ba56b48.jpg.html)
:thumbsup: :thumbsup: ;)
Thanks Ram
Mounted the motor and the bearing block
And its a ONE PIECE block , Like The Align .
The motor Mount Heat sink And is of good quality.
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_191401_zps97bb6315.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_191401_zps97bb6315.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_191405_zpsca227639.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_191405_zpsca227639.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_190255_4_zpseaa1ced0.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_190255_4_zpseaa1ced0.jpg.html)
Did the Main Gear Mesh setup with addition of the DFC head ;D
Need to set mesh before installing the Servos , otherwise you wont be able to access the motor mounting screws
Need 1mm gap between the pinion and Gear for proper mesh . You can use the paper method.
This heli is running on 121T Slant with 12T Pinion for best output.
The NTM 6s Motor is insane .
Solid head i must say . I did lube the bearing .
The center head block got Three screws to totally secure it with main shaft {:)}
The DFC linkages are pretty thick and hard to break.
The swash got 4 ball links .
I'm Using the Tarot bearing oil for lubrication and the TL-242 Threadlock .
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_194543_zps55f156c0.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_194543_zps55f156c0.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_194636_zpse141315d.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_194636_zpse141315d.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_195047_zps511bc7ca.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_195047_zps511bc7ca.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_195142_zps1d45a6de.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_195142_zps1d45a6de.jpg.html)
Using servo Extensions from VBAR to Rx , I placed the rx in between the frames.
A mounting plate is available in between the frames for Gyro or rx
Even secure the cables for less vibs . Vibs can travel through Cable to Gyro
Made sure to isolate the Vbar from surrounding to avoid extra vibrations
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_195731_zpsdfd62063.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_195731_zpsdfd62063.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_195736_zps243d716b.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_195736_zps243d716b.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_195751_zps7f1b3d9f.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_195751_zps7f1b3d9f.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_195806_zpsdb4de812.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_195806_zpsdb4de812.jpg.html)
Gud going buddy...How was the Maths exam? hehehe
Dat v bar is a big bugger..
Maths was fine Doc .
12k straight for vbar :'(
Did you saw the KBar From RcBazaar ? They perform great same as Vbar and almost half the price :o
Boom Block
Checked for bad bearing and made sure that the gears are smooth.
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_200258_zpsf34aaa41.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_200258_zpsf34aaa41.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_200308_zps169bf891.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_200308_zps169bf891.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_200553_zps684b199c.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_200553_zps684b199c.jpg.html)
nice dhruva, would love to watch it flying..
Good one Dhruv; would come and fly with you next time i come home to Thane
Soon Avesh Bro . Just waiting for the CF skids to finish it up .
Anytime Gusty Sir :thumbsup: Would love to fly with you :bow:
As expected the Autorotation gear and the rear tail rotor Drive gear had a little jamming maybe due to The shape of Auto gear. Which i think will be fine after few flights . I applied little Grease Which was included in the kit for building purposes.
NOTE : Can't tighten the Boom Block Right now as the Tail Fuse needs to cover it.
(http://i1274.photobucket.com/albums/y438/dhruvafreak/Mobile%20Uploads/20140320_200846_zps8fb7b763.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/Mobile%20Uploads/20140320_200846_zps8fb7b763.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/Mobile%20Uploads/20140320_200827_zps138b884a.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/Mobile%20Uploads/20140320_200827_zps138b884a.jpg.html)
Powered up the servos and Vbar .
Calibrated the transmitter with the vbar and did the basic setting like reversals etc .
Mounted the Castle ESC on the right side of the frame using 3M Tape .
And that's the Brick 6s LiPo . ;D
The servos need to be trimmed which i'll do later after installing in the frame.
Keep the motor disconnected while setting up the gyro
(http://i1274.photobucket.com/albums/y438/dhruvafreak/Mobile%20Uploads/20140320_204745_zps79581311.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/Mobile%20Uploads/20140320_204745_zps79581311.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/Mobile%20Uploads/20140320_204753_zps9f1379a4.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/Mobile%20Uploads/20140320_204753_zps9f1379a4.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/Mobile%20Uploads/20140320_204735_zps8f31815a.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/Mobile%20Uploads/20140320_204735_zps8f31815a.jpg.html)
Clear crisp pics Dhruva
Making me fall love with helis.
Hahahah Thanks . These are taken with my damaged phone cam :giggle:
More to come
great going Dhruva
Thanks Sujit Sir ;D
Installed the Cyclic servos
Now I can't Access the motor mounting screws .
Linkage length is as per Align manual . But Gotta hit and try to make 0 Degree at mid stick
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_212117_zps9538bb17.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_212117_zps9538bb17.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_212205_zpsbb72f4f8.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_212205_zpsbb72f4f8.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_212121_zps392a3bd5.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_212121_zps392a3bd5.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_212154_zps2dd8f4a9.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_212154_zps2dd8f4a9.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_130621_zps08e408af.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_130621_zps08e408af.jpg.html)
Here's the tail servo
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140320_215747_zpsb0186f9f.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140320_215747_zpsb0186f9f.jpg.html)
:) looks nice {:)} {:)}
Ram You haven't seen it with the Canopy and CF skids yet :giggle:
Wait for more ;D
Links installed
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_130821_zps2b98464d.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_130821_zps2b98464d.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_130905_zps41967e8b.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_130905_zps41967e8b.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_131120_zps94924b2d.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_131120_zps94924b2d.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_131838_zps7718c9c7.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_131838_zps7718c9c7.jpg.html)
Now the Boom fuse need to be Attached to the frames
NOTE : I have seen boom coming out of many PROs after few runs so either you can pin the boom or use a little tape on the edge of the boom (portion which goes inside the boom block) so that it settles permanently
The other Tail Servo Horn like the star one needs to be trimmed other wise they Bind with the Boom fuse . So i'm using Circular one
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0096_zpsfcf1fcc0.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0096_zpsfcf1fcc0.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124814_zps68af48f7.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124814_zps68af48f7.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124635_zpse977d864.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124635_zpse977d864.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124645_zps9d7c3a84.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124645_zps9d7c3a84.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124839_zps9ce68cf7.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124839_zps9ce68cf7.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124827_zpse615bce4.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124827_zpse615bce4.jpg.html)
Here's the Tail case . Without Fins
This case assembled but need to be opened and threadlocked . Lots of screws , need to be properly threadlocked .
And yes it's beautiful ;D
The Fin Screws Goes through The Boom Fuse and then to the case .
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0102_zps20bb29ef.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0102_zps20bb29ef.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0100_zps266e01b8.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0100_zps266e01b8.jpg.html)
Professional quality build log Dhruva! Keep it up. Crisp photography.
Thanks a lot VC sir :hatsoff:
Seriously Dhruva, seldom does one come across such no nonsense lucid photography on a RC build thread. What equipment are you using, if I may enquire?
You won't believe sir Its my Old backup phone - HTC Sensation .
There's something wrong with the CAM . Like in the last two pics you will find something wrong at the center of the pic.
Speechless. I always felt that the HTC brand was under rated. {:)}
Hahah yes sir . The build quality is amazing IMO its better then Samsung haha :giggle:
Did the ESC programming - Governor Etc
www.youtube.com/watch?v=QYgC-akDuzc (//http://)
After applying the Vertical Fins
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124542_zps8c528b93.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124542_zps8c528b93.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/20140321_124623_zpsd3e1bd9f.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/20140321_124623_zpsd3e1bd9f.jpg.html)
Make it, maiden it and then, sell it off..
Dhruv: Ur officially a member of the Gaui x5 grin club. You cant keep this thing near the Gaui else, when you sleep the X5 will shred this to pieces in anger.
Hahahah Doc . I'm in Multi Club and This thing lives on first floor and the Gaui On top, so they can't face each other LOL !
And The X5's Heart The Vbar is Missing so Devil is safe :giggle:
WARP 360 Coming Soon >:D >:D
Updating with today's Newspaper
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0110_zps4092ac63.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0110_zps4092ac63.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0111_zps8056c79a.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0111_zps8056c79a.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0114_zps8f77e051.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0114_zps8f77e051.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMAG0116_zps295bbe40.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMAG0116_zps295bbe40.jpg.html)
Clean Build Dhruva..!!
Thanks umayash :)
Looks like a nanha munna goblin
Hahah yeah Doc . Gotta wait for few days for the CF Skids
Bhai HELI thread mein lath gardiye :) ~~ DHRUVA TOO GOOD
BHAIYA GOD HO APP HELI KE ~~ AB maan lo yee baat :)
WINNER & GAME OVER
Thanks a Lot Rahul Bhai :thumbsup:
Tail Parts Intact now
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09267_zpsec6255f6.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09267_zpsec6255f6.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09266_zpsde7d75af.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09266_zpsde7d75af.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09265_zps10706a42.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09265_zps10706a42.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09264_zps40141a5a.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09264_zps40141a5a.jpg.html)
The Carbon Fiber Skids Arrived ..
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09240_zps95dc5034.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09240_zps95dc5034.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09243_zpsd2e1d38f.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09243_zpsd2e1d38f.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09244_zps5cd1700b.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09244_zps5cd1700b.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09288_zps4c3f8fc4.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09288_zps4c3f8fc4.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09289_zps7655c38b.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09289_zps7655c38b.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09290_zps9d9de9c5.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09290_zps9d9de9c5.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09291_zps6251736c.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09291_zps6251736c.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09292_zps08b7c631.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09292_zps08b7c631.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09294_zps1a84ea89.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09294_zps1a84ea89.jpg.html)
With the test blades
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09328_zps67709538.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09328_zps67709538.jpg.html)
Maiden video coming soon :D
Great Build dhruva :hatsoff:
Thanks Dineash :)
Just did the maiden and a kid made the video .
Will post soon
Sorry for the terrible Video Quality
Will make a good video tomorrow . This was the maiden video - First Flight
Tail Gain was pretty low . Had to increase 20 point ahead . Current DX8 Gain 90%
The Futaba S9257 is a great Tail servo for any 450 .
Plus I don't need to tweak the I and P gains for the VBar . Its like Made for each other (Vbar and 9257)
So currently running high gain.
www.youtube.com/watch?v=ryzMvWd7EOA&feature=youtu.be (//http://)
Now i have installed the RJX Vector Blades 360mm
and few pics
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09477_zps0fd4f86b.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09477_zps0fd4f86b.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09381_zpsd070e695.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09381_zpsd070e695.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09464_zps2fc7c117.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09464_zps2fc7c117.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09467_zps17f7bcdc.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09467_zps17f7bcdc.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09386_zps3e76012e.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09386_zps3e76012e.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09449_zpsed5b0a72.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09449_zpsed5b0a72.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09402_zps82258c09.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09402_zps82258c09.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09442_zpsa2c79fc2.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09442_zpsa2c79fc2.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09436_zps3ae0a296.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09436_zps3ae0a296.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09406_zps2dc0ecbc.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09406_zps2dc0ecbc.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09415_zpsdd6d5a0e.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09415_zpsdd6d5a0e.jpg.html)
Stable hover dhruva
:-)
Thanks Dineash :)
Just uploading another morning flight video
www.youtube.com/watch?v=aY7QgysMZCA&list=UUg2frt2LwBSVyFFgU9Ujakg&feature=share (//http://)
Awesome !!! sounds smooth nd looks stable .. gr8 beauty too .... {:)} {:)}
Thanks Joe .
I did the inverted and stuff too but the camera man was more interested in watching live ;D
The VBar performs rock solid (:|~
Now this model is done almost . I'll concentrate more on Airwolf Now .
No Warp for now , it's a Headache :banghead:
awesome build , u are a great pilot :)
Thank You Rahul Bro . I'm just pilot not great hahaha
Nice flying dhruva ... :-)
Thanks Dineash .
Here's more pics from last day evening testing flights (:|~
Perfect Blade Tracking ;D ;D
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMG_5540_zps6fe14eb7.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMG_5540_zps6fe14eb7.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMG_5514_zps6b12d3d8.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMG_5514_zps6b12d3d8.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMG_5522_zps04798b4a.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMG_5522_zps04798b4a.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMG_5526_zps7ec5710e.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMG_5526_zps7ec5710e.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/IMG_5539_zps69b7c286.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/IMG_5539_zps69b7c286.jpg.html)
tempting me to buy one ;D
nice :thumbsup:
Hahaha Definitely Get One .
Just take care that the 2200 3s fits hardly inside . Needs redrilling the holes
And 6s only Brick one properly without re-drilling holes
That head and bearing blocks looks solid , would love to get one and get it in the air
Thanks Nitin
Yup those head is sexy but i'm confused about the material they used.
Whole head heated up amazingly fast under one minute while heating up the feathering shaft screw using soldering iron.
Its seems to be sturdy but a crash will say
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09525_zps73fce3a3.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09525_zps73fce3a3.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09536_zps06b2649e.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09536_zps06b2649e.jpg.html)
(http://i1274.photobucket.com/albums/y438/dhruvafreak/DSC09537_zps78712a55.jpg) (http://s1274.photobucket.com/user/dhruvafreak/media/DSC09537_zps78712a55.jpg.html)