RC Models => Helis => Topic started by: KunalRanawat on December 05, 2010, 01:36:37 PM
Title: Any one in Mumbai to help me with HKJ 500 CCPM 3D Assembling
Post by: KunalRanawat on December 05, 2010, 01:36:37 PM
Any one in Mumbai who can help me to assemble my HKJ 500 CCPM 3D heli.
Major Challenges:
Configuring servos to get 90 degree alignment and tx configuration
Please help me to assemble this heli, i am stuck from last 15 days on this.
Reply back or drop a note on
Appreciate your help.
Cheers, Kunal Ranawat
Title: Re: Any one in Mumbai to help me with HKJ 500 CCPM 3D Assembling
Post by: sujju on December 05, 2010, 03:05:07 PM
which tx are you using?..
Title: Re: Any one in Mumbai to help me with HKJ 500 CCPM 3D Assembling
Post by: KunalRanawat on December 05, 2010, 03:07:51 PM
HK 6ch
Title: Re: Any one in Mumbai to help me with HKJ 500 CCPM 3D Assembling
Post by: chokxxi90210 on December 08, 2010, 08:30:35 PM
Kunal, I'd say you better buy a proper tx / rx with better capabilities, the HK tx is not such a good option of this size of Heli.
I am done assembling the bare-bone with a custom made tail boom, will be plugging in the servos, gyro, ESC and Motor this weekend. Still need to buy the tx/rx and the battery
Can you share some pictures of your heli here, it will help me a lot. Also which battery you are using for this one ?
Title: Re: Any one in Mumbai to help me with HKJ 500 CCPM 3D Assembling
Post by: KunalRanawat on December 09, 2010, 12:51:21 PM
This is my configuration: urnigy Typhoon 500H Heli Motor 1800kv (500 Class)