Print Page - asssan ga250 how to toggle in 9x

Title: asssan ga250 how to toggle in 9x
Post by: adityareddy on August 05, 2012, 06:24:50 PM

hi guys i have a confusion with my assan ga 250 gyro, in the manual its is shown that to configure the servo toggle the switch 3 times but i dot find that switch in my turnigy 9x what should i do

Title: gyro config help
Post by: adityareddy on November 04, 2012, 12:12:32 PM

hi frnds
iam confused in gyro setup for my ahf 3d heli
so can any one tell me how to toggle gyro in turnigy 9x
i cant understand how to config gyro by toggling
for toggle it should be changed to some avcs mode but dont getting that so plz help with this

Title: Re: gyro config help
Post by: dhruvafreak on November 04, 2012, 12:49:01 PM

I m also having problem to setup my gyro with this transmitter...
searched on internet a lot and I found THAT uprate is when your gear switch towards you (i have NORMAL=RATE MODE ) and when downwards (away from you) then AVC (headlock) ..
MODEL is GY and I have full gain on gyro

correct me if something wrong

Title: Re: asssan ga250 how to toggle in 9x
Post by: anwar on November 04, 2012, 12:58:07 PM

http://www.rcgroups.com/forums/showthread.php?t=1450768

RC India

RC Models => Helis => Topic started by: adityareddy on August 05, 2012, 06:24:50 PM