Text only | Text with Images

RC India

RC Models => Helis => Topic started by: xxkrishxx on May 04, 2012, 06:33:50 PM

Title: cyclic servo mounting in Hiller 450 basic
Post by: xxkrishxx on May 04, 2012, 06:33:50 PM
Hey,attention Hiller 450 basic heli owners.Planning to use hxt900 servos.which screws u have used to mount the cyclic servos in ur heli? as its like a slot.did a search in my local hardware stores to get screws n nuts but couldn't find.kindly share it with a pic.Thank you.

:hatsoff:
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: RcBazaar on May 05, 2012, 12:12:52 AM
Hi xxkrishxx
I will check with our team if they can send some pics on how to mount the servos...

regards
Sujju
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: xxkrishxx on May 05, 2012, 07:16:29 AM
Thanks sujju sir.
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: asinghatiya on May 05, 2012, 10:20:35 AM
Actually there are small plastic square shaped fittings must have came with the kit, these pastic fittings fit in these slots. Try and find out your kits content.
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: xxkrishxx on May 05, 2012, 10:22:25 AM
Yes i got those but how to fix them?
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: xxkrishxx on May 05, 2012, 10:28:30 AM
Should I use it as a washer or nut?
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: asinghatiya on May 05, 2012, 10:28:59 AM
These square fittings are grooved and can be fitted in the space provided. Try it.
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: xxkrishxx on May 05, 2012, 10:30:48 AM
Thank u.. Will try
:-)
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: xxkrishxx on May 05, 2012, 12:40:35 PM
asinghatiya: gr8 info man.done tat.The black square shaped fittings are to be used.attaching the pic.
Title: Re: cyclic servo mounting in Hiller 450 basic
Post by: asinghatiya on May 05, 2012, 02:54:38 PM
Thanks :thumbsup:
Text only | Text with Images