there some small problems
the motor is running but
the blades are not rotating
pls help me out
some the pics
& conopy is little bit damaged
when i opened the box
Things to check.
1. Motor pinion gears are fixed well on the motor shaft.
2. The motor pinion gears is touching the main gears.
3. The motor is turning in the right direction. If it is running in the opposite direction, the one way bearing will cause the main gears to free-wheel. Most likely this is the issue. To fix it, reverse any two of the three wires running from the ESC to motor.
motor running in opposite direction
all the functions are alright
To fix it, reverse any two of the three wires running from the ESC to motor.
ok i will convert it from red to black & black to red
And your training skids are fixed wrong (as in the second picture). They need to be fixed in more of an "X" orientation than a "+" orientation (while viewed along the tail boom).
ok sir thanks
i will do that
& blades are rotating now as you said
changing the the two wires
shubham.. pls check for loctite and also check for the pitch settings before you take it up for a hover (not to mention the gyro setting in HH mode)
ya i will check that
which model is this
http://www.rcbazaar.com/products/876-450-v2-ready-to-fly-with-transmitter-lipos-and-charger.aspx
this one
similar to trex 450 v2