I am totally new to RC helis. Have flown fixed wing before in my younger days and wanted to get back into RC. Started with a NE Solo Pro last month and have been flying the rotors off practicing indoors. Just bought a Mini Titan 325 from Rotorsport hoping to graduate to it slowly. Planned to use my existing Futaba 6EXHP with it. However when I connected everything up I got no response from any of the servos except an initial jerk. Even the Gyro refused to light up. Fearing a defective gyro I disconnected the rudder cable and the ESC cable from the gyro and connected them directly to the RX. Still no response. So maybe I am dealing with a dud ESC?
I live in Hauz Khas Enclave in New Delhi. Is there an experienced heli hand close by who I can talk to?
Thanks in advance.
hi
you can contact mr jamal ahmed.he stays in gurgaon and will be more than happy to help you.
you can contact him at 9811792323.
cheers
puneet
Hey,
I stay in west Delhi, Vikaspuri, you can call me if you need any help.
It seems like you need to rebind your Rx and Tx and also just plug in a 6 volt NImh battery to your RX (batt/bind) port to check if everything works this will by pass ESC and you can check if ESC is the problem.
take care
Hellyflyer
9811171361
Hi Guys
Thanks a ton for pointing me in the right direction Puneet. I will call Jamal and speak with him today and meet him when I get back from my summer jaunt.
Hellflyer I dont know how I missed that step Will do so today and check. will also speak with you once i get back in July.
All the best.
Pradeep
I just had a chat with Mr. Jamal Ahmed and he was very kind. I plan to meet him once I get back in July and seek his help and advice with my flying. Thanks Puneet.
In the meantime I took Hellflyer's advice and connected the rudder and a 6v battery pack to the RX and the servo worked. So obviously the problem lay in the ESC and it turned out to be a lose contact. Connected everything up and I have radio response!!!!!
Kind of sluggish response but response nonetheless. So with a proper set-up things should start working out. i hope to have it working by end July with Mr. Ahmed's help.
Thanks again guys!
Pradeep