hi,
I am very new to R.C so i really need help. which software do i need to download to control HILLER 450 V2 with HK-T6A V2 REMOTE CONTROL.
When i just operate it directly the servos are not moving completely (only sone 15 degrees)

please help.

Use the transmitter cable which came with the transmitter to adjust servo settings on computer, check out hobbyking website and files tab to see link for softwares requierd for this tx,

Hellyflyer

i cannot find any info about any software to be used on that page

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042

In this page, about 70% of the way down, you will see a bar of horizontal tabs named "Discussion", "Reviews", "Videos" and "Files". Click on "Files". 

You will find files like "HK450 with HH Gyro Settings".

Thankss

can u also tell me how can i balance the centre of gravity of the heli, i can't find any video on that

Quote from: anwar on June 01, 2012, 01:35:12 PM
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042

In this page, about 70% of the way down, you will see a bar of horizontal tabs named "Discussion", "Reviews", "Videos" and "Files". Click on "Files". 

You will find files like "HK450 with HH Gyro Settings".

just lift the heli with flybar horizontal to the heli and move the battery down or up to adjust the CG, you can also add some nose weight inside the canopy to counter the tail weight.