Hi All,

Iam new to RC.

Has done on building SPAD couple of years back, But not able to fly.
Started once again Now

I have got a new kit on Mini titan ARF,
My motor not starting, dont know what might be the Problem
Have 7cap futaba

Can some body please help

Thanks in Advace

Have you reversed channel 3 (throttle) ?  For Futaba electric setups, this is a must. 

If you have not done it, reverse channel 3, turn off the power on the heli side, and turn on the power again (I guess by disconnecting and reconnecting the battery).

THanks for the reply,


Should I do that on the Tx

Absolutely !

As in page 30 of the manual here :

http://manuals.hobbico.com/fut/7c-2_4ghz-manual.pdf

Thanks Anwar,

I have attached the Photo of my Mini Titan,

I have custom painted my canopy

Good to see the DIY person in you is still alive.  What paint etc did you use ?

Bosny Aerosol Spray cans

First did wet sanding with 400 grit ( did for lot time)
Then again washed with pril in warm water, dried it using a hair dryer,
The two coats of Primer ( Aerosol Cans)
Did little bit sanding and Painted it with two coats and lastly with clearkote, my second job with spray cans.

Hey where do u stay?

Hi Vinay,

I stay in Indiranagar near domlur flyover.

Hi Anwar,

Tried reverse for the throttle still didnt work
Any other things i have to check.

Make sure that the ESC is initializing and you hear the required beeps if not try to calibrate your throttle, We will be able to give a more specific answer to the issue in hand if you did the following:-

1. Post the specifications of the ESC and Motor and confirm that the you have checked all loose connections, dry solder's etc

2. Post a video of what exactly is happening.


Hellyflyer

Hi Hellyflyer,
I used an ace RC BLC 40 came with kit, Tried calbirating but nothing happend after the intial sound,
All other keys work, when you move the throttle the swatch moves, but the motor doesnt spin.

Have you tried replacing the ESC?

No, this is the only one i have, and it is brand new

Try contacting me(jayanagar) or Ujjawal (Ujjwaana - Koramangala) directly on weekend, will solve it. Or Ujjwal may be able to help you out even before weekend, if you can take it to his place. He is a futaba guy. you just need to take ur ESC motor battery tx rx.

Thanks for the support vinay, I can contact Ujjawal, he is near to me, Can you ping me his no. through private message

Just make sure u update this thread once the issue is resolved,  so that its helpful for others.  

Met Ujjwal yesterday, It was nice meeting him.
We tried every check possible, we have found the motor working by tests
and also the ace working properly,
But still not from the TX 

"Throttle hold" or "Throttle cut" permanently engaged ?

I didnt get that anwar, still a newbie 

This thing has something called as a built in ECCPM mixer on the Gyro (Takes all the inputs from the RX). Thats what ujjwal told me. Probably something to be disabled anwar and make use of the 7Cs built in mixing?

eCCPM mixing in the radio OR mixing in the ACE gyro unit... whatever it is, it should only affect movement of the servos.

So this seems to be either wrong wiring, or Throttle Cut, Throttle Hold etc enabled on the TX.

What vinay is talking about is TG-6100M Gyro
The details are in this link
http://www.tiger.com.tw/product/AQ0843.html

Yes, that is what I meant by the "ACE Gyro Unit" in my above post.

Wonder if Rajesh/RotorZone can spare some time to help with this in person

PS: The easiest thing to do in this world is to "volunteer others"