I am starting this new thread to keep you all posted about my latest possession the HobbyKing 450MT (Align T-Rex 450 clone/replica )
I just got off hobbyking as I ordered my stuff, here is what all I have ordered

HK-450MT CCPM 3D Alloy Barebone Kit (Align T-Rex Comp.)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12390

TP 450-Size 2415-03T Brushless Heli Motor 4850kv
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6261

Hobbyking SS Series 50-60A ESC
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7339

Hobby King 401B AVCS Digital Head Lock Gyro
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10113

ZIPPY Flightmax 2200mAh 3S1P 20C
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6306

Turnigy Carbon Fiber Main Blade 325mm (1pair)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12900

Fiberglass Canopy for Trex-450
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10956

Pinions
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8574


Tools

Main Rotor Blade Assembly Tool (5mm)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11041

R/C Helicopter Pitch Gauge
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9653

HK-171 Thread Locker & Sealant Medium Strength (Blue)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11409


Apart from these I will be using my own HXT900 Servo, Spektrum AR6100 RX and Spektrum DX6i TX

Next step is to wait for those stuff to arrive, I will post my build pictures and the first flight video here and will try to keep this thread alive. Wish me luck

All the best for your build

Very interested in knowing the performance of the motors, it is 1000 more KV than the original Align ones !

4850 KV? I read few reviews and people using 11 T ? What the heck? that would be super duper fast then, probably lower throttle curve then.

Yes, I read some reviews that it is more of a rocket than a heli... I got both 11 & 13 T so will do some experiments.. I have a stock 3850KV as well.. may be I will try that too. Waiting for stuff to arrive... which could be pain at times

Dont ever bother about the 13 T there 

I am just learning and need help from all the veterans.. I wont be doing any 3D as of yet, playing with Simulator so far.

Buy yourself some good hex driver set first.

I have couple of them... but still please recommend if you have any good recommendation on the same.

hello to all

from where in india we can get good pair of Hex drivers.

nehal kapadia

I would not recommend anything other than the MIP Thorp 1.5 mm hex. But its expensive at 15 USD.

The problem I saw with align is that align is 1.5 mm and HK screws are 1/32 inch which is slightly larger than Align Hex. Hence the screws get stripped easily.

If u plan to stay longer in hobby MIP is a decent investment.

wait for others to reply.

German WIHA Hex Driver set available best price at TOWER******* -  Excellent quality - order for delivery by air mail - much cheaper than available from anywhere including Delhi & Bombay

Regards

please PM me with the web link or some store where I can get those.

Current status of shipment...


Date #   Location   Delivery Status
22-Oct-2010   Hong Kong   Item posted and is being processed.
22-Oct-2010   Hong Kong   Processed for departure.
22-Oct-2010   Hong Kong   The item left Hong Kong for its destination on 22-Oct-2010
23-Oct-2010   India   Arrived and is being processed.
23-Oct-2010   India   In transit.

Thanks findvikas for starting this thread. I am planning to buy the same Heli kit. Please keep updating regularly - it will help us all. 

Would be grateful if the Senior Heli Flyers would spend some time going through the chart and advise us of the expected flight characteristics of both aircraft. They are largely similar with a few differences here and there. I feel both findvikas and I would benefit from your suggestions / advice.

Vikas, I hope this is OK with you, this is your thread, after all.

Thanks and Regards,

VC

Sure bud... but I could not see the text on the picture... better post some text with Hyperlinks or some high resolution picture.

I know what you mean. I've been trying to post an excel sheet as a jpg - it is not working out. Will try again later. The only diff is the motor and therefore the ESC, I am using a 30A ESC and an extra Tail Hold Servo, while your motor is more powerful and needs a 60A ESC. Other than that, we are on the same track.

All the best!

VC

Post the links directly VC, otherwise we need to individually type all those links just to find out what those products are.

And none of us needs a 60 amps ESC. even Align ship their products with 35 amps. You need 60 amps if you are flying like a Pro with 4S and a 3300+ HS. Else even for an extremely good heli, I dont see the need for a 40+ ESC, but a good one like plush is better.

I also remember reading that one of those scorpion motors needed a 60 amps ones, but those motors are expensive and our turnigys are equally good at 1/4 the price but are slightly inefficient.

again a begineer question, could there be a problem having 60a ESC on my setup I read somewhere in reviews that 60a is better so I got it and also 30-40a was in backorder. HK has very limited ESCs or they sell like hot cakes, either ways the are mostly sold out.

Hey hope yoou get it soon

bigger is better

but heavier on the downside.

Quote from: Bill on October 23, 2010, 05:10:07 PM
German WIHA Hex Driver set available best price at TOWER******* - 

What's up with the "TOWER*******" ?   If you mean TOWER HOBBIES, just say it so !!!!  You can speak your mind here

hello

is this set up ok

model :- HK-450MT
Motor :- Turnigy Typhoon 450H 2215H Heli motor 3550k.
ESC    :- Turnigy Plush 40 amp.
Gyro   :- HK401B.
Tail servo :-  Turnigy MG90S.
Battery :- Turnigy 2200mAh 20C 3S1P.

if some thing is missing plz add it

thanks
nehal kapadia

Thanks... I think 4850kv should be able to accommodate extra weight

Quote from: vinay on October 24, 2010, 09:49:09 AM
bigger is better

but heavier on the downside.

Here is the link for the wiha hex driver set http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKN80&P=ML

Regards