Must be something with your connection. Can you try attaching just one image ?

Anwar bhai, try to attach DSC00618.JPG but it gives error " HTTP 500 internal server error"

04/24/2011  06:37 PM            87,093 DSC00618.JPG
04/24/2011  06:37 PM           111,752 DSC00619.JPG
04/24/2011  06:37 PM            94,255 DSC00620.JPG
04/24/2011  06:37 PM            82,687 DSC00621.JPG
04/24/2011  06:37 PM            87,932 DSC00622.JPG
04/24/2011  06:37 PM            96,251 DSC00623.JPG
04/24/2011  06:37 PM            93,858 DSC00624.JPG
04/24/2011  06:37 PM            89,004 DSC00625.JPG
04/24/2011  06:37 PM            89,080 DSC00626.JPG
04/24/2011  06:37 PM            88,241 DSC00627.JPG

Quote from: AshwinM on April 24, 2011, 07:08:33 PM
The HK450GT PRO tail servo does not go on the boom. You have to make a simple mod to get the DS480 in the rudder servo tray. Make a servo mounting adapter to fit the tray such that the servo horn reaches the linkage.

Thanks Ashwin for the "TIP", Can you post some pics for the said MOD...   

Also like to know what type of grease to be used for thrust bearings ?

Quote from: netsecrets00 on April 25, 2011, 11:20:56 AM
Anwar bhai, try to attach DSC00618.JPG but it gives error " HTTP 500 internal server error"

Can you try once more ?

No Sir!!! same error still...

Once more

There is something strange about your session, it seems to be allocating more memory than others.  What browser and operating system are you using ?

Anwar Bhai, using Windows 7 ultimate 32bit, IE9, Internet connection 10Mbps (in office)

let me resize pics again with "IrfanView" for WEB View

Here are pics for my HK shipment !!!

Some more 

Some more again !!!

Will post more once start building the Heli...

got my heli after 20 from the date of ordering via air parcel

will enjoy building this kit with the help of you guys.

HK-450GT CCPM 3D Full Alloy Helicopter Kit (Align T-Rex Compat.)

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10900

attaching pics

I ordered for 3 sets of wooden blades and 1 set fibre blades. the kit came with 1 set of fiber blades.

electronics are coming in another parcel. will put the pics when i get them.
more pics

Hey Akash, Finally you got your shipment deliverd

yup very happy  no customs was levied 

Quote from: netsecrets00 on April 25, 2011, 11:22:58 AM
Thanks Ashwin for the "TIP", Can you post some pics for the said MOD...   

Also like to know what type of grease to be used for thrust bearings ?

I used an the align servo tray with the align servo, so I haven't done this mod yet. But do plan to in the future.

I use this grease.

http://www.readyheli.com/MINITRIFLOW-Tri-Flow-Grease-14-oz-Bottle_p_35506.html

Got My Whia Hex Drivers today.... 

1.5mm x2
2mm x1
2.5mm x1
3mm x1
4mm x1
5mm x1

hi netsecrets00

from where u buyed it ?

i m looking for it.

Hi Nehutech, I have got this locally for  :Rs:1550/-

I have a cheaper alternative. Its Jackly 31 in 1 electron screwdriver set. costs  :Rs:130, bought it locally. It contains hex 1.5, 2.0, 2.5, 3, 4. The holder is magnetic, hence it holds the screw. Comes handy in a small lantern style container. The only drawback of this is its length. It can reach to depth of 1 inch.

As it has happened to me my piece of advice is, dont use this. You will damage the screws.

that,s too bad. does these hex drivers strip the hex screws? stripping of screws is because of bad screws, which dont have required hardness isn't it?

Yes the screws are not that much good. But if you have a hex which fits exactly then there will be no issues. Dont try these cheap ones. Atleast go for the hobbyking hex drivers.

Do I have to set DR for any of the controls ?

Instead of DR, for beginner setups I would reduce the aileron and elevator throws using the swash mix menu. I would also add some amount of expo (-ve for Futaba).

Also, to slow down the piro rate (ie, how fast the heli rotates via tail when rudder is applied), I reduce the ATV/EPA (endpoint or travel adjust) to 75 or 80 for the rudder channel.  Note that ATV/EPA is NOT the same as DR.

Having said all this, there are many ways to skin the cat !

Anwar can you give me the numbers