Some one asked for a list of spares to order with an HK 450 v2 heli.  I would like to hear from people who have just started with these helis, and have possibly had some recent crashes    (Am I looking at Vinay )

I will add to the list if needed after getting some responses.

Tat some one is me only

mine is not recent on these heli but the usual suspects in a crash are as follows
- tail boom
- feathering shaft
- main blades
- landing gear (if you are a new)
- main gear
- main shaft
- tail shaft
- belt

I would also add one flybar, and one set of linkages used in building the head (both the linkage rods and the plastic see-saw pieces).

The plastic posts used to hold the canopy in place ("canopy mounting posts") is another thing that I remember was a fairly frequent victim.

V2 Crash?  

Last time I was trying inverted when I crashed it. I believe I rammed the heli at +12 pitch @ 3000 + RPM (v curve) with CF blades straight to ground  , Half of the head was ripped off at that speed and power.  

Even the main blade holder had a thread that holds the ball link ripped off. The V2 head now ended in the spare pack so that I can reuse the links and balls etc in the future.

I suggest get yourself an MT barebones Kit   if you are a serious flyer.

MT is out of stock now..Waitin for the new stock..Anyway atleast a set of spares will be required..So pls list the spares for MT or V2..

I believe almost all the spares required are covered by sujju, anwar. I crashed my V2 and the head was ripped off. So I suggested the MT as it contains a Metal HEAD and all the other spares suggested by sujju and anwar are in the kit. Most damaged spared as per my experiance:

Flybar, Boom, main gear, Main shaft, Blades, landing gear, Servo gears if using plastic servos, tail shaft, belt, tail blades, feathering shaft, damper rubber.

And it all depends on the crash.

Thanks for the replies..

Servo gears for non-metal servos... important !  I should have remembered that one !

I have some HXT n Turnigy non metal gear micro servos..Which one is good?

HXT 900 are good and precise. But I suggest u use MG14 servos.

sir i have a hiller v2 but need a fly bar, rcb dont have in stock, so can a v3 bar fit on v2,   do you have spare ones i need it... thanks