RC Models => Helis => Topic started by: rc ram on September 13, 2012, 09:25:59 AM
Title: setting for hiller 450 beginner
Post by: rc ram on September 13, 2012, 09:25:59 AM
please can any tell me setting for hiller 450 beginner for fs ct6b transmitter i am new in rc hobbys :)
Title: Re: setting for hiller 450 beginner
Post by: dheerajjuneja on September 20, 2012, 04:42:57 PM
Hi, the settings are all different for different combinations of electronics. I would suggest that you read all about the settings and go about setting things on your own or take help of an expert flyer around your local area.
Title: Re: setting for hiller 450 beginner
Post by: rc ram on September 20, 2012, 10:43:17 PM
:salute:thank,s i will chek it any senier in my area....
Title: Re: setting for hiller 450 beginner
Post by: RcBazaar on September 20, 2012, 11:11:40 PM
ram... pls pm me you contact number
sujju
Title: Re: setting for hiller 450 beginner
Post by: ebinmoothedam on September 20, 2012, 11:35:50 PM
Excellent video tutorial here --> Hiller 450 Setup Videos (http://www.youtube.com/user/RcBazaar?feature=CCAQwRs%3D)
Title: Re: setting for hiller 450 beginner
Post by: rc ram on September 21, 2012, 09:59:16 AM
:hatsoff: sujju sir i,m going in my village for next7 days for ganesha festival and there is no network for my simcard so sorry for that but i will come back in mumbai after 7 days and iwill call you and my acount on rc bazaar site my email id is ,,,,,,i also order for hiller 450 beginner kit but my village planing i cancelled this orders ........plese can you speak in hindi when i call you because my english is not perfect........sorry again sujju sir... :bow:
Title: Re: setting for hiller 450 beginner
Post by: joseph lr on September 21, 2012, 10:59:14 PM
here very good tutorial, from setup #1 - #16 http://www.youtube.com/watch?v=Z4zJREpU7u0
Title: Re: setting for hiller 450 beginner
Post by: madrulzzz on February 23, 2013, 10:43:08 AM
Hi Ebin/Sujju, Ebin, Nice Pics and build log man \m/ Got a Hiller 450 beginner yesterday. The problem is I keep stripping the screws, I was removing the Tail boom attachmet and 2 of the 10 screws stripped. While attaching the tail rotor assembly, one more got stripped. Due to this I am not sure if I should rebuild from scratch, what if I strip more?
@Sujju I am not able to find the long screws necessary for attaching the vertical fins to the boom. Also Where can I find the lengths to which I should adjust the link rods of the swash plate for the beginner 450. If i am to get spare screws from outside (Bcoz its out of stock in RC Bazaar) what size should I ask for.
I actually need a lot of help building this, can Some one out there help??
Title: Re: setting for hiller 450 beginner
Post by: rajathv8 on February 24, 2013, 08:30:38 AM
Which hex driver are you using? The screws are soft and easily strip on this kit. The Hiller V3 screw set (machined screws) is of better quality, however i doubt they can be used on the Beginner kit which requires self tapping screws. You can refer Align 450 Sport or Align 450 SE V2 manual for any info. You can refer my thread (http://www.rcindia.org/helis/from-ir-to-450-ccpm/) too. :)