Text only | Text with Images

RC India

RC Models => Helis => Topic started by: adityareddy on October 04, 2012, 07:18:53 PM

Title: setting transmitter for ahf 3d plz help
Post by: adityareddy on October 04, 2012, 07:18:53 PM
hi frnds iam new to rc and very badly confusion in my tx for ahf 3d
if i do throtle stick forword all the three servos are moving wat should i do
iam using turnigy 9x

plz help
Title: Re: setting transmitter for ahf 3d plz help
Post by: anwar on October 04, 2012, 07:45:55 PM
What is "ahf 3d" ?
Title: Re: setting transmitter for ahf 3d plz help
Post by: adityareddy on October 04, 2012, 09:37:47 PM
aelous 50 3d heli  :salute:
Title: Re: setting transmitter for ahf 3d plz help
Post by: murcielago on October 05, 2012, 09:33:15 AM
Hi,

U said ur using turnigy for 50 size nitro??

I personally would not prefer using Turnigy for a nitro heli...dat too a 50 size....JR or Futaba would be much better....Just my opinion..

Regards
Title: Re: setting transmitter for ahf 3d plz help
Post by: anwar on October 05, 2012, 10:57:06 AM
Are you familiar with eCCPM helis, or are you just getting into helis ?  What you described above ("3 servos moving with throttle") is expected behavior. 

Please do seek local help if you are a true beginner in helis, especially this size/class of helis.  Otherwise you will end up either losing a lot of money, or getting injured, or both !
Text only | Text with Images