Print Page - setting up DXsi with Belt CP V2

Title: setting up DXsi with Belt CP V2
Post by: asinghatiya on April 04, 2011, 03:57:36 PM

Friends, after receiving organge Rx...I have now upgraded my Esky Belt CP to 2.4 Ghz. I am struggling with its pitch and throttle settings on DX6i. Any one who already using this configration may like to help :)......Thanks for all the support.

Title: Re: setting up DXsi with Belt CP V2
Post by: Bill on April 05, 2011, 11:48:56 AM

Hi,

Pls visit site myrcguides.com He has a dedicated video for setting up the belt cpv2. I have done the same on DX7 SE. Wonderful.
Regards

Title: Re: setting up DXsi with Belt CP V2
Post by: Hellyflyer on April 05, 2011, 11:49:14 PM

Hi Arvind,

Just make sure that the throttle sitck is at the center when you are setting it up. :thumbsup:

Thanks
Hellyflyer

RC India

RC Models => Helis => Topic started by: asinghatiya on April 04, 2011, 03:57:36 PM