Main Menu

Solo Pro Flybar Modification

Started by gbisht, May 28, 2011, 12:40:41 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gbisht

Hi RC lovers,

I am using Nine Eagle Solo Pro V2, and this heli is good for starting 4-CH. but the problem with this heli is its flybar are very flexible, so flybars strike on canopy when you do fast transitions. So make flybar  hard or non- flexible I used ear  buds stick  and make them little bit shorter then original
HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT

sunk?

hi mate,
did this solve the problem of striking the canopy?
regards
don
regards
don
UK

gbisht

Yes but not that much... ..and also not that much hard  ;)

but be carefull when u modify flybar....after modification flybar should be equal from both side
and also blanced.

Find attached image for its balance
HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT

gbisht

Hi buddys,

If you having solo pro and want spare parts for repair, so you can order JC Helicopter Model No 9C2002 insted of Nine Eagle Solo Pro V2.

JC Heli parts are cheapter compair to Nine Eagle

JC Parts
http://www.helipal.com/spare-part_jc-helicopters-parts_9c002.html

Solo pro
http://www.helipal.com/spare-part_nine-eagles-parts_solo-pro.html
HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT